Go Back   AzBilliards.com > Miller's Profile
Reload this Page Albums
Miller's Albums
  Album Title Pictures Last Picture
Picture My Second Pool Hall
1 05-15-2013 02:24 PM
Picture My Pool Hall
1 05-14-2011 08:25 AM
Picture Billiard Bench
Pine construction.

Seat height 29-1/2".

Backrest at 8 degree angle.

Pilot holes for everything and screw head locations recessed with a variety of forstner bits.

Exposed edges routed with round over bit, everything sanded down to 220 grit.

Minwax wood conditioner and gel stain.

Secured with a variety of torx screws with a dab of gorilla glue.

Foot rest hardware from on line bar supplier, about $80.

Finish with wipe on poly, hand sand with steel wool. Wood wax and buffer.
16 04-23-2011 01:50 PM
Picture Cue Rack
Pine construction, back is birch paneling.

Pilot holes for everything and screw head locations recessed with forstner bit.

Exposed edges routed with rabbeting bit, everything sanded down to 220 grit.

Minwax wood conditioner and gel stain.

Secured with torx screws and a dab of gorilla glue on each.

Trim secured after rack hung on wall with 18 ga 3/4" brads.

Corner pieces are cut down cove trim.

Finish with wipe on poly, hand sanded down with steel wool. Wood wax and buffer.

Glass hardware purchased through Rockler, about $10.

Beveled glass from local shop, about $30.

Picture light from on line vendor, uses D batteries, about $45.
10 04-23-2011 01:48 PM


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.