AzBilliards.com

AzBilliards.com (http://forums.azbilliards.com/index.php)
-   Cue & Case Gallery (http://forums.azbilliards.com/forumdisplay.php?f=10)
-   -   1993 Schon (http://forums.azbilliards.com/showthread.php?t=273633)

taozhong 05-02-2012 04:03 AM

1993 Schon
 
Hi all.. Not too sure if this section is the right place for this thread but here goes..

I bough this particular Schon: http://forums.azbilliards.com/showthread.php?t=249637

Would like inputs from those AZ'ers who have more knowledge on Schon cues.. What joint is that? It looks different from the standard 5/16x14.. If i were to get a new shaft from schon would it fit? And I noticed that very few schon shafts have that 'Schon 13' sign on the collar. Is there any significance of that sign?

Any input would be greatly appreciated!

ogre4905 05-02-2012 04:20 AM

I don't know about pin but I know the schon 13 on the shaft was a only used on shafts made in 1993

Sent from my DROID RAZR using Tapatalk 2

Renegade_56 05-02-2012 06:45 AM

yes, the newer shafts will fit,,,,,that pin was only used about a year, but it's the 5/16-14 thread.

West Point 1987 05-02-2012 07:08 AM

That's an ACME pin, only used that year...I've got it on my STL 17, it's a great joint. All 5/16x14 shafts I've tried will fit the butt, but the inserts on the 1993 "13mm" shafts won't fit other non-ACME pin butts. Something about the pilot being too big and the brass insert (maybe) too shallow...don't know. I do know that all 7 of my non-Schon 5/16x14 shafts (2xJoss, 2xGEM, 2xCarolina and 1 Gulyassy SPTX) fit my Schon no problemo...The two Schon shafts I have won't fit any of the other butts but my Schon, though.

Renegade_56 05-02-2012 07:12 AM

Quote:

Originally Posted by West Point 1987 (Post 3578171)
That's an ACME pin, only used that year...I've got it on my STL 17, it's a great joint. All 5/16x14 shafts I've tried will fit the butt, but the inserts on the 1993 "13mm" shafts won't fit other non-ACME pin butts. Something about the pilot being too big and the brass insert (maybe) too shallow...don't know. I do know that all 7 of my non-Schon 5/16x14 shafts (2xJoss, 2xGEM, 2xCarolina and 1 Gulyassy SPTX) fit my Schon no problemo...The two Schon shafts I have won't fit any of the other butts but my Schon, though.

green to ya on this one,,,,,,great info

taozhong 05-02-2012 08:33 AM

Hey thanks to all that have their input! Much appreciated!!

Slim Limpy 05-02-2012 06:40 PM

**********


All times are GMT -7. The time now is 09:44 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2015, vBulletin Solutions, Inc.