Scruggs Fancy not so Sneaky Pete!!

Sev

Sev

I taut I saw a pussy cat!
Silver Member
First I would like to thank Tim Scruggs, Jeff Wolfe and by proxy Cory Barnhart for taking the time and effort to authenticate this cue for me.

This cue is rather fancy for a Scruggs Sneaky Pete.

The cue measures as from the butt cap to face of ferrule as follows. 57 7/8" with the first shaft and 56 3/8" with the second shaft.
Its weight is 18oz and 18.2oz respectively.
The joint is piloted.
The pin is 5/16x14
The joint, butt cap, collars, black & white rings are phenolic.
The center of the ring series is Tulip wood. Capped by black phenolic, nickel and white phenolic.
The cue rolls straight.

There are 3 minor blemishes on the cue which I will point out in the pictures.

Sold for cash and trade.

101_0717.jpg


101_0718.jpg


101_0719.jpg


101_0722.jpg


Blemish 1 is on the butt cap.

101_0723.jpg


Blemish 2 is a very fine chatter mark on the the collar face edge of one of the longer of the shafts.

101_0725.jpg


Blemish 3 is a crack in the finish of the shorter of the 2 shafts.

101_0724.jpg
 
Last edited:
I wish I could afford this cue...it is super nice!! This one shouldn't last long at all...all the best with your sale!!!

Lisa
 
CAPPY said:
would you consider a trade for a jmw sneaky full splice if so contact me at 9145896137
Click to expand...

Thank you for the offer Cappy.
I would love to have White but unfortunately its not in the cards this time around.
 
Last edited:
I do Russ. I do.

Timi said the cue was built and donated to a friend. It was of no consiquence the cue's imperfections because it's purpose was to help a buddy raise money. They did that alot.
It sold for $1100.00 when it was new.
Nick :)
 
Would also consider shaving off some from the price if an ebony titlist or 26.5 were part of the deal.

I dont need or want a museum piece.
It has to be straight to the 29 inch mark. The points need to be intact. At least 1.400" in diameter at the bottom and .985" at the top of the points. At least .875" at the 29 inch mark. This would translate into about 14mm at the ferrule.
 
You must log in or register to reply here.
Back
Top