4 point, 4 veneer, full splice Varney Cue

Status
Not open for further replies.
Ken_4fun

Ken_4fun

AzB Silver Member
Silver Member
I helped Kevin out when he was in a bind, and he built this cue for me to repay me.

I have $400 in it, but want $250 + shipping obo, on the cue. It is a full splice that I had him put a wrap on for me. It comes with 1 shaft.

The cue plays stiff, even stiffer than a Southwest. I used it to be my bar table player cue. It plays well, if you like a stiff cue. It is a perfect cue to take to bars where you might not want to take a better cue, but you still play with good playing cue.

The pin is 3/8 10 McDermott pin, which I think is the best pin for the joint.

To be perfect it needs a refinish, if you choose to go that route. It has some scraps and you can see a little in the photos. It is a solid players cue. If you are looking for a great playing cue, for very little money, this would be the cue for you.

I offer money back guarantee less shipping on EVERYTHING I sell, so there is no risk.

Enjoy the pictures.







Ken
 
If I remember right, the only flaw with the cue is the finish? If you weren't such a sucker for wraps I would have taken it. Actually, if it doesn't sell pretty quick give me a call and we'll work something out. I got a nice Mezz shaft that will fit right on it....:thumbup:

The butt seemed to me like it had a slightly smaller diameter or taper, which I liked....similar to an ivory joint Mike Stacey I have. Dollar for dollar this is probably one of the best deals on here right now.

snowmon34 said:
Really Ken, 1 post, and 2 bumps in 18 minutes???
Damn buddy that's close to a weeks worth of bumps!

You have this Self-righteous attitude (and your usually spot on), but don't care about
your fellow members..

Take it to pm, or email!
Click to expand...
Normally I wouldnt bother but it does seem that zig is a new member and may not know what a pm even is, nor did he leave an email. I actually had this cue in my posession is why I posted some of the details. A lot of threads are becoming over run with superfluous "bumps" but im sure this one will not reach that point, or go on for days even after the cue is sold.....hence why I edited this original post instead of fueling the fire :thumbup:
 
Last edited:
Yep you got me. But the wrap is excellent.

I am basically giving the cue away.

Cleaning house.

Ken
 
zig said:
What is the weight, length, shaft width, etc. Straight ?
Click to expand...

You got me at a disadvantage as I have just moved. It is a lighter cue and estimate the weight at 18-19, 58 inch, and 12.85-13mm.

Shaft might have slight movement, but IMO, I would call it straight.

Ken
 
Really Ken, 1 post, and 2 bumps in 18 minutes???
Damn buddy that's close to a weeks worth of bumps!

You have this Self-righteous attitude (and your usually spot on), but don't care about
your fellow members..

Take it to pm, or email!
 
Last edited:
Kens pm what a guy!

Ken_4fun said:
Bite me.

Who put you in charge? Is it such a big deal to you?

Didn't you get what you want for Christmas?

Jeez.

Get a life.

I am sure you are going to run and tell the teacher or your mommy.

I can see why all the folks at Jimbo Army makes fun of the AZ folks like you.
Ken
Click to expand...

Nobody put me in charge Ken, and I rarely make comments on inconsiderate members, but you have no problem pointing fingers..

As I said your usually right in a lot of cases, but a blatant disregard for the rules, and other members is selfish..

Christmas was great thanks for your thoughts..

I don't have a teacher, and why don't we leave mothers out of this one..

I hear Jimbo's has a wanted for sale, I'm sure they'll allow you to bump till
your blue in the face..

11) Over-active bumping is not allowed. If most of the replies to your post are bumps that is overactive bumping. Anything more than a single bump in any 48-hour period is over-bumping.
 
Status
Not open for further replies.
Back
Top