Howdy, I just became the proud owner of a Phillipi fancy sneaky... the previous owner it looks like put a dot of gorilla glue on the butt cap to hold the rubber bumper in. It was originally a push in rubber bumper, 1" over all diameter and the 3/8" thick. The shaft that pushes in (that just sounds bad) needs to be 9/16" in diameter. I've looked through all of the sources I can find and can't find one that has that shaft size. I talked to Rick at Phillippi and he thought it was an older cue and they may have made it or they used to get some from Palmer... but didn't have anything and couldn't really remember.
While I can take a larger shaft bumper and try and cut it down... thought I'd ask if anyone knew of any or had any other suggestions.
Thanks in advance!
While I can take a larger shaft bumper and try and cut it down... thought I'd ask if anyone knew of any or had any other suggestions.
Thanks in advance!