SneakiestPetes for sale

poolfool1957

poolfool1957

I know the pieces fit
Silver Member
All are solid hardwood and made in the USA. I think the prices on these cues combined with the quality components equals a cue that is worthy of most any case. These all come with an OB-2 shaft with a Medium Kamui II tip and Radial G-10 joint pin and j/p's. I can get a cue to you in a month if I don't already have what you want. No inlays, no rings, no nothing and that's it. The SneakiestPete!

Tried to download pics but they are too large. Is anyone willing/able to do so if I e-mail them to you? poolfool1957@yahoo.com

Cue #5, the Redheart has now become my full-time shooting cue. The hit is firm and how can I put it?.......Sweet!

Cue #1 is 18.4oz in Tulipwood $295.00 shipped
Butt is 14.9oz
Shaft is 3.5oz
Balance Point is 17 1/4"

Cue #2 is 18.8oz in Ebony $300.00 shipped
Butt is 15.4oz
Shaft is 3.4oz
Balance Point is 17"

Cue #3 is 19.1oz in Shedua $275.00 shipped
Butt is 15.5oz
Shaft is 3.6oz
Balance Point is 16 1/2"

Cue #4 is 18.7oz in Purpleheart $SOLD shipped
Butt is 15.2oz
Shaft is 3.5oz
Balance Point is 16 3/4"

I will have the following available for sale within the next 2 weeks:
Goncolo Alves with an I-3 shaft, Moori, G-10 pin $275.00 shipped
Rosewood with an OB-1 shaft, Moori, G-10 pin $285.00 shipped
Bloodwood with an Z-2 shaft, Moori, G-10 pin $360.00 shipped
Kingwood with a I-2 shaft, Moori, G-10 pin $295.00 shipped

In 2 more weeks I'll have these:
Ebony with an I-2, Moori
Zebrawood with an I-1, Moori
Cocobolo with a Tiger Ultra X, Sniper
Cocobolo with an OB-1 *Kamui Black
Bacote with an OB-1 *Kamui Black
Purpleheart with an OB-1 *Kamui Black
DSCF0501.jpg

DSCF0471.jpg

DSCF0467.jpg

DSCF0500.jpg

DSCF0502.jpg
 
Last edited:
What I would suggest to you is to sign up for photobucket. Then you can post pictures on here and not have to worry if the photo size is the right. Just up load to photobucket and then put the link to the photo here. Takes just a min or two to sign up and its free. Good luck in the sale.

Also do you have the cues with a non low deflection shaft?

poolfool1957 said:
bump before bed
Click to expand...
 
Last edited:
Thanks for the help. Wont be able to do so until tonight.
I can do any of these cues without the LD shaft. I can do them with a different joint pin and/or tip. Name a weight, name a ferrule width, name a wood, tell me what you want and I'll let you know if I can do it, how long it will take and how much it will cost.
 
Just wondering if these are typical balance points for a sneaky. Can't wait for the pics, sounds like a good deal.
 
The OB-2's are fairly light shafts. A shaft with a 13mm ferrule will push the balance point out a bit further.
 
Give me the most trustworthy and knowledgeable person on this site and I'll send one for a full review as long as I get it back afterwards. I just ask that the cue gets a fair review based on value and performance and not compared to something that was made by a master.
 
Very generous! Too bad I have'nt been playing pool long enough to be a reviewer. I'm sure someone here will step up though.
 
love the way they look...I can volunteer the place where I normally play to give the cue a whirl to get a review, one of the guys there collects cues and has a lot of experience when it comes to cues
 
Good luck in your sales Poolfool1957. I just got wind of him when I ran across his cue on ebay. I chatted back and forth with him for awhile. He (Rick) seems like a stand up guy. He obviously has a passion and a talent that our sport needs for support.

I am a tad upset for one reason though; I have had a dream of building these exact cues for about a year now. Only issue, I know nothing about cue building.

When the pocket books are filled with more money I may have you building me a Ebony/Z2 w/ a 30" shaft..! :thumbup:
 
poolfool1957 said:
Give me the most trustworthy and knowledgeable person on this site and I'll send one for a full review as long as I get it back afterwards. I just ask that the cue gets a fair review based on value and performance and not compared to something that was made by a master.
Click to expand...

Well I would ask Bamacues, Fast and Loose, Hal, Bnall, lenoxmjs, or phinmole if it was me.
 
  • Like
Reactions: Hal
You must log in or register to reply here.
Back
Top