1: WilleeCue J/B
Black diamond wood forearm, maple handle/butt sleeve
White/black ringwork
Radial pin at both joints
This is my personal j/b, so it has a few knicks and could use a refinish, but is great as is for a j/b.
Originally made for the ASP organization with an acrylic forearm, but the forearm was damaged in shipping and so Willee made it into a jump/break. This is the first jump/break that Willee made.
$200 shipped
2: Abear Sneaky
Rosewood into maple w/birdseye butt sleeve
Black phenolic w/silver ringwork
Butt: 15.13oz, 29.5"; Shaft: 3.98oz, 29.5", 12.97mm; Total: 19.11oz, 59"
piloted 5/16x14, Signed Abear 11-95
The butt could use a refinish, it has some battle scars and the butt sleeve and rings were added later, but you can feel them. It could use a refinish, but if done would lose the signature.
SOLD
3: Joe Bouska Sneaky
Light brown wood(?) into Maple w/ Oil finish
Tan linen phenolic rings/butt cap, phenolic joint
Butt: 15.90oz, 29"; Shaft: 3.74oz, 29 1/8", 12.92mm; Total: 19.64oz, 58 1/8"
3/8x10 pin, Signed Bouska '09
SOLD
4: Jim Odom Sneaky
Goncalo Alves into Maple
Brown linen phenolic rings/butt cap, phenolic joint/hoppe ring
Butt: 14.17oz, 28 7/8"; Shaft1: 3.66oz, 28 7/8", 13.05mm; Shaft2: 3.72oz, 28 7/8", 13.12mm; Total: 17.83-17.89oz, 57 3/4"
One shaft played with few scratches and bluing, the other test hit only
3/8x10 pin, Signed Odom '08
SOLD, 1 shaft still available - $75.00 shipped.
5: James Hanshew Sneaky
Ebony into Birdseye Maple, Purpleheart joint/butt cap
Buckhorn ferrule, buckhorn joint rings, buckhorn hoppe ring
Butt: 15.92oz, 29 1/8"; Shaft: 3.63oz, 28 3/4", 12.62mm; Total: 19.55oz, 57 7/8"
3/8x10 pin, Signed 8-16-06 James Hanshew 1/1
Butt cap has two small chips and shaft has some bluing.
$300 shipped
6: Carolina cue
NFS
7: Dave Barber cue
4pt Purpleheart into Birdseye w/curly handle, white & black veneers
Ivory joint, Ivory Buttcap, Ivory rings
Butt: 28 7/8", 13.81oz; Shaft1: 29 1/4", 3.69oz, 12.56mm, Ivory ferrule: Shaft2: 29 1/4", 3.74oz, 13.10mm, LBM ferrule; Total: 58", 17.5-17.55oz
3/8x10 pin
One small chip in bottom of butt cap and 1 crack in finish on forearm.
This cue is on the Cover of American Cueist and I have that issue which will go with the cue and it's in excellent shape!
$765 shipped
8: Zylr cue
Bocote & Curly Maple
Butt: 29", 14.56oz; Shaft1: 29", 3.58oz, 12.74mm, Buckhorn ferrule; Shaft2: 29", 3.63oz, 12.82mm, Buckhorn ferrule; Total: 58", 18.14-18.19oz
3/8x11 pin
There are a few chips in the finish on the butt cap, but the buckhorn is not chipped though.
SOLD
9: Steve Kornele cue
8pt Ebony & Birdseye, 4hi/4low all with red, red, black veneers
Ivory ferrules, Ivory joint, Ivory recut points, Ivory inlays, Ivory rings, non-ivory buttcap
Butt: 29", 14.66oz; Shaft1: 29", 4.17oz, 12.93mm; Shaft2: 29", 3.5oz, 12.81mm; Total: 58", 18.16-18.83oz
3/8x10 pin
The butt cap is cracked, there is a chip in the finish on the butt sleeve, a dent in the forearm that doesn't break the finish, and the shaft collar on Shaft1 is chipping off.
SOLD
10: Jerry Rauenzahn cue
NFS
11: Hunter Classics titlist conversion
NFS
12: Steve Klein titlist conversion
NFS
13: Toeboy titlist conversion
NFS
Last edited:
