I received this shaft directly from the Tim Scruggs/Mike Cochran shop in the early 1990's.
- Length 29"
- Weight 3.9 oz.
- Joint is 5/16 x 14 piloted, with a brass insert
- Diameter at ferrule just under 12 mm (this was the original diameter, not one resulting from wear or maintenance)
- Diameter at joint 0.836"
- Ferrule is aegis, just slightly under 1" in length
- Tip is original and not laminated (probably Triangle)
- Trim ring pack is a black and maple stitch ring in the center, a black ring to each side of that, and a silver ring to each side of that
- Condition is nearly new (test hit with chalk, then chalk cleaned off), but with a very slight wobble (irrelevant for purposes of playing pool)
$Sold, including shipping in the U.S. (extra for shipping outside U.S.)
...pictures deleted...
- Length 29"
- Weight 3.9 oz.
- Joint is 5/16 x 14 piloted, with a brass insert
- Diameter at ferrule just under 12 mm (this was the original diameter, not one resulting from wear or maintenance)
- Diameter at joint 0.836"
- Ferrule is aegis, just slightly under 1" in length
- Tip is original and not laminated (probably Triangle)
- Trim ring pack is a black and maple stitch ring in the center, a black ring to each side of that, and a silver ring to each side of that
- Condition is nearly new (test hit with chalk, then chalk cleaned off), but with a very slight wobble (irrelevant for purposes of playing pool)
$Sold, including shipping in the U.S. (extra for shipping outside U.S.)
...pictures deleted...
Last edited:
