Threading Cutters

billiardbum

billiardbum

Listen U Might Learn!!!
Silver Member
These are for sale if any Cuemakers are interested. I have about 10 each of them. These cutters are Precision Ground Carbide and 1/4" Shank, and are used for Internal Threads in Shafts - "A" Joint Threading - Butt Sleeve Threading - Threading Ferrules - Threading Joint Collars, etc...If you have further questions you can PM me.

Smaller Cutter: $130 shipped to US
.135" Reduced Shank Diameter
.240" Minimum Bore Size
1.35" Depth from Reduced Shank to Center of Cutter
2.5" OAL

Larger Cutter: $140 Shipped to US
.200" Reductd Shank Diameter
.375" Minimum Bore Size
1.35" Depth from Reduced Shank to Center of Cutter
2.6" OAL

CutterswithThreadedwood.jpg


CuttersChoice.jpg
 
Thread Pitch

This is an 11 pitch, example is the butt sleeve threaded the last inch of the tenon
 
Hey, u know what that looks like a 3/8 11 or a 3/8 10 tap cut down,and they only cost around 40.00,i guess it would save u money so u didn't have to buy joint pins.........just do them out of wood urself
 
I use these as an active tool, in a router running 30,000 Rpms, you want to make sure everything is running pretty true for this. Not sure a reduced tap would work. Jim
 
Ok .....i don't get it ... how it works, is he dowel in the lathe and were is the router...........Thanks Greg (gscues)
 
gsirca said:
Ok .....i don't get it ... how it works, is he dowel in the lathe and were is the router...........Thanks Greg (gscues)
Click to expand...

Here is a picture of my set up. Might make it easier to understand.
 

Attachments

  • threadmill.jpg
    threadmill.jpg
    30.6 KB · Views: 629
billiardbum said:
These are for sale if any Cuemakers are interested. I have about 10 each of them. These cutters are Precision Ground Carbide and 1/4" Shank, and are used for Internal Threads in Shafts - "A" Joint Threading - Butt Sleeve Threading - Threading Ferrules - Threading Joint Collars, etc...If you have further questions you can PM me.

Smaller Cutter: $130 shipped to US
.135" Reduced Shank Diameter
.240" Minimum Bore Size
1.35" Depth from Reduced Shank to Center of Cutter
2.5" OAL

Larger Cutter: $140 Shipped to US
.200" Reductd Shank Diameter
.375" Minimum Bore Size
1.35" Depth from Reduced Shank to Center of Cutter
2.6" OAL

CutterswithThreadedwood.jpg


CuttersChoice.jpg
Click to expand...
Anyone else interested in these?
 
You must log in or register to reply here.
Back
Top