i was in need of a few maple veneers this weekend and my stock supply was gone. i decided to try and cut just a couple so i could get a cue glued together.
as many of you know i have a fullsplice jig i made, bolted on my 14 inch grizzly bandsaw. it moves on ball bearings and is very smooth cutting.
after i got the jig set square, i took a piece of maple and got it square using my planer, then started cutting maple, i got it thinner and thinner until i got it down to under 1 mm thick.
i am very impressed with the grizzly band saw, it has the 3/8 blade that came on it and it has stock guides.
as many of you know i have a fullsplice jig i made, bolted on my 14 inch grizzly bandsaw. it moves on ball bearings and is very smooth cutting.
after i got the jig set square, i took a piece of maple and got it square using my planer, then started cutting maple, i got it thinner and thinner until i got it down to under 1 mm thick.
i am very impressed with the grizzly band saw, it has the 3/8 blade that came on it and it has stock guides.
