Anyone interested in a new BCM fresh out of Bryan's shop?

jdelcue

jdelcue

AzB Silver Member
Silver Member
I've got one being built right now. It's due in May. Since I know I'll just be trying to sell it when I get it, I thought maybe the buyer might appreciate being able to buy it before it leaves Bryan's shop...and this would give them the opportunity to fine-tune it for themselves rather than me. If interested, go ahead and send me a PM. Here are some pics of what it will look like (very "Bender-esque"):
 

Attachments

  • DSC07739_jpg.jpg
    DSC07739_jpg.jpg
    42 KB · Views: 496
  • DSC07746_jpg.jpg
    DSC07746_jpg.jpg
    44.1 KB · Views: 400
  • DSC07738_jpg.jpg
    DSC07738_jpg.jpg
    50.3 KB · Views: 813
  • DSC07743_jpg.jpg
    DSC07743_jpg.jpg
    44.7 KB · Views: 293
Last edited:
It will look almost exactly the cue above with just a few differences: The BCM is 5pts. ebony on curly maple w/ ebony butt sleeve and black phenolic joint/butt cap. Silver railroad ring work in all positions (ABCDE). Solid black smooth pressed linen wrap instead of leather (although it can be changed at cost with Bryan). (2) 13mm shafts w/ Ivory ferrules and Moori M tips (although any of that can also be changed). 19.2oz. Hit me up for more info...


Thanks,
- Joaquin.
 
Last edited:
jdelcue@emory.e said:
I've got one being built right now. It's due in May. QUOTE]

Just remember you are on the cuemaker's calendar/time when they say Due in May (did he say May of which year?). I had one due in March, and I don't THINK that Bryan has even had a chance to start on it. I think he said he had 29 orders in progress...
Joe
Click to expand...
 
Bamacues said:
jdelcue@emory.e said:
I've got one being built right now. It's due in May. QUOTE]

Just remember you are on the cuemaker's calendar/time when they say Due in May (did he say May of which year?). I had one due in March, and I don't THINK that Bryan has even had a chance to start on it. I think he said he had 29 orders in progress...
Joe
Click to expand...

You're right...
He did say May of this year, but I'll go ahead and give him a call tomorrow anyhow...

Thanks!
Click to expand...
 
Last edited:
jdelcue@emory.e said:
Bamacues said:
You're right...
He did say May of this year, but I'll go ahead and give him a call tomorrow anyhow...

Thanks!
Click to expand...

Just as Bama suggested, I called up Bryan and asked him about the status of the cue...

He is prepping parts for the next month or so on all the 20+ orders he has and he will start assembling the cues at that time and THEN he can give me a better estimate of due date.

I have also considered the addition of veneers to the order, for anyone interested in making that change: he stipulated that this must be done as soon as possible -- within the next week or so. So if anyone is interested in the cue were it to have veneers, let me know...

Also, if you are interested in adding inlays, I was told that it would add about a month to the production time, but he is willing and able to do so...

Regardless, we're looking at some time after May. So just go ahead and PM if you're interested in the cue at all and we can take it from there...

Just want to let everyone know I'm not really looking to make a killingon the cue sale or anything. To do so wouldn't be respecting Bryan much, in my opinion (its his labor and service which will produce your product, after all -- all I've done is email him a few months ago and send a simple deposit). Just looking to get out of this one and pass it on to a fellow AZer so they can have it made however they'd like...so I am very flexible on dealing with the cue. And I've got some ideas to discuss for anyone interested in it....


Thanks,
- Joaquin.
Click to expand...
 
jdelcue@emory.e said:
jdelcue@emory.e said:
Just as Bama suggested, I called up Bryan and asked him about the status of the cue...

He is prepping parts for the next month or so on all the 20+ orders he has and he will start assembling the cues at that time and THEN he can give me a better estimate of due date.

I have also considered the addition of veneers to the order, for anyone interested in making that change: he stipulated that this must be done as soon as possible -- within the next week or so. So if anyone is interested in the cue were it to have veneers, let me know...

Also, if you are interested in adding inlays, I was told that it would add about a month to the production time, but he is willing and able to do so...

Regardless, we're looking at some time after May. So just go ahead and PM if you're interested in the cue at all and we can take it from there...

Just want to let everyone know I'm not really looking to make a killingon the cue sale or anything. To do so wouldn't be respecting Bryan much, in my opinion (its his labor and service which will produce your product, after all -- all I've done is email him a few months ago and send a simple deposit). Just looking to get out of this one and pass it on to a fellow AZer so they can have it made however they'd like...so I am very flexible on dealing with the cue. And I've got some ideas to discuss for anyone interested in it....


Thanks,
- Joaquin.
Click to expand...

A black and red veneer and a Hoppe ring on that puppy would look nice. Ivory joint. Hmmmmm
Click to expand...
 
Sweet cue....
sweeter than my bank account would allow for...LOL
And practically exactly to my specs! ::sigh::

Well...good luck with the sale, joaquin!
 
BrooklynJay said:
Sweet cue....
sweeter than my bank account would allow for...LOL
And practically exactly to my specs! ::sigh::

Well...good luck with the sale, joaquin!
Click to expand...



LOL....BrooklynJay, this is too funny!

:D
 
BrooklynJay said:
Sweet cue....
sweeter than my bank account would allow for...LOL
And practically exactly to my specs! ::sigh::

Well...good luck with the sale, joaquin!
Click to expand...




Thanks! :D

Appreciate the bump. Hope to return the favor in the near future...
And never hesitate to ask if ya need anything, buddy... ;)
 
You must log in or register to reply here.
Back
Top