I've got a few cues that I'm selling in order to fund more cues. The cues listed below are first to go, but other cues/cases in my signature are also possibly for sale if the right deal comes along!
All prices negotiable, so feel free to make offers!
ALL Trades considered. Multiple cue trading is welcomed.
All types of cues considered, especially a Rauenzahn, Scruggs, ABEAR, or something like those.
Additional pictures of each cue are available upon request.
Top to bottom:
1. Unknown - Possibly Rich? - Looks to be cocobolo with a rings and windows in the butt sleeve. Cue has steel joint with unusual pin. Cue does have a slight roll. I will verify where the roll is at and how bad as soon as I can get it to a pool table. Cue is just under 57" and is approx. 19oz and 12.50mm tip. $100
2. Widowmaker cue - This cue was made by Bert Kinister, which you may have heard of because of his training videos since he is a certified intstructor. I believe Bert referred to this as the "Presidential" cue. It is a 59 3/4" cue with 6 points. I believe they are bloodwood, but I am not positive. Black w/red linen wrap. The butt sleeve has angled maple rings. There are also stich-style rings at all positions with phenolic butt cap and joint. 3/8x10. approx. 19 1/2 oz. 12mm shaft with ivory ferrule. The cue has a couple of knicks in the butt sleeve and a chipped butt cap. All of these were prior to my purchase of the cue. The finish has dulled around the joint area as well. $300
3. Brianna Cue - Made in 2006. This is a 4 point 4 veneer hoppe style cue. The butt sleeve looks like a very dark rosewood. The points seem to be ebony with natural, blue, orange, and black veneers in-out. There is a lizard print leather wrap. There is a hoppe ring which is, I believe, alt. ivory. This cue has a brass 3/8x11 pin. The cue comes with a laminated shaft that is approx. 13mm. It is 57 1/2" long and is approx. 19 1/2 oz. Cue has been test hit only! $325
4. Dave Fingers Cue - Made in late 2006. This cuemaker has previously been on AZBilliards, but I haven't seen him around in awhile. The cue is a very solid cue. The cue has 4 cocobolo points with 2 veneers, natural and black. The butt sleeve is a dark piece of cocobolo with a black butt cap. The handle is a nice piece of curly maple. The finish is a french/oil rubbed finish I believe. The joint is cocobolo with a radial pin. The cue has one shaft at 13mm. 58 1/2" long, just under 19oz. Cue has been test hit only! $350
5. Chad Carter Cue - Made in 2003. This is a 4 point ebony into birdseye maple cue with 4 veneers. orange, green, blue, black in-out. There are double orange/blue rings at top/bottom of wrap and above butt cap. The joint is black phenolic with a silver ring and radial joint. There are two shafts at just above 13mm. One shaft is original and I think the other shaft was added shortly after, but both could be original. Approx. 19 oz with either shaft. The cue is in great shape. SOLD
6. Scott Whisler Cue - Made in 2004. This is a 4 point 3 veneer cue. The points are birdseye maple into a zebrawood forearm. Dark blue, mapel, light blue veneers in-out. The butt sleeve is also zebrawood. The wrap is white irish linen. The cue has a birdseye maple joint with a 3/8x10 pin. just over 19oz. 13mm shaft. just under 58 1/2". $450
All prices negotiable, so feel free to make offers!
ALL Trades considered. Multiple cue trading is welcomed.
All types of cues considered, especially a Rauenzahn, Scruggs, ABEAR, or something like those.
Additional pictures of each cue are available upon request.
Top to bottom:
1. Unknown - Possibly Rich? - Looks to be cocobolo with a rings and windows in the butt sleeve. Cue has steel joint with unusual pin. Cue does have a slight roll. I will verify where the roll is at and how bad as soon as I can get it to a pool table. Cue is just under 57" and is approx. 19oz and 12.50mm tip. $100
2. Widowmaker cue - This cue was made by Bert Kinister, which you may have heard of because of his training videos since he is a certified intstructor. I believe Bert referred to this as the "Presidential" cue. It is a 59 3/4" cue with 6 points. I believe they are bloodwood, but I am not positive. Black w/red linen wrap. The butt sleeve has angled maple rings. There are also stich-style rings at all positions with phenolic butt cap and joint. 3/8x10. approx. 19 1/2 oz. 12mm shaft with ivory ferrule. The cue has a couple of knicks in the butt sleeve and a chipped butt cap. All of these were prior to my purchase of the cue. The finish has dulled around the joint area as well. $300
3. Brianna Cue - Made in 2006. This is a 4 point 4 veneer hoppe style cue. The butt sleeve looks like a very dark rosewood. The points seem to be ebony with natural, blue, orange, and black veneers in-out. There is a lizard print leather wrap. There is a hoppe ring which is, I believe, alt. ivory. This cue has a brass 3/8x11 pin. The cue comes with a laminated shaft that is approx. 13mm. It is 57 1/2" long and is approx. 19 1/2 oz. Cue has been test hit only! $325
4. Dave Fingers Cue - Made in late 2006. This cuemaker has previously been on AZBilliards, but I haven't seen him around in awhile. The cue is a very solid cue. The cue has 4 cocobolo points with 2 veneers, natural and black. The butt sleeve is a dark piece of cocobolo with a black butt cap. The handle is a nice piece of curly maple. The finish is a french/oil rubbed finish I believe. The joint is cocobolo with a radial pin. The cue has one shaft at 13mm. 58 1/2" long, just under 19oz. Cue has been test hit only! $350
5. Chad Carter Cue - Made in 2003. This is a 4 point ebony into birdseye maple cue with 4 veneers. orange, green, blue, black in-out. There are double orange/blue rings at top/bottom of wrap and above butt cap. The joint is black phenolic with a silver ring and radial joint. There are two shafts at just above 13mm. One shaft is original and I think the other shaft was added shortly after, but both could be original. Approx. 19 oz with either shaft. The cue is in great shape. SOLD
6. Scott Whisler Cue - Made in 2004. This is a 4 point 3 veneer cue. The points are birdseye maple into a zebrawood forearm. Dark blue, mapel, light blue veneers in-out. The butt sleeve is also zebrawood. The wrap is white irish linen. The cue has a birdseye maple joint with a 3/8x10 pin. just over 19oz. 13mm shaft. just under 58 1/2". $450
Last edited: