Cameron Cue w/ Judd Fuller Shaft must go!

running

we call her chocolate
Silver Member
PRICE LOWERED!!! SEE BELOW
Custom made Barry Cameron Cue
3 Hi and 3 Low Ebony points into Highly Figured Bird?s Eye Maple
Red and Black Veneers that really add a nice accent
Soft and supple Ostrich leather wrap
Ebony Butt with 6 Ivory Diamond Inlays
Ivory joint and Ivory Butt Cap
Butt portion is 29.25 inches long

Shaft is custom made by Judd Fuller
30 inches long with his upgraded "Efren Reyes" taper
12.25 mm tip

Total weight feels like 18.5 - 19 oz. I don?t have a scale to measure.
Well balanced. Balance point is about 19 inches from butt end.
Condition is very good. There are 2 minor chips in the finish smaller than a bb and the rubber bumper has seen better days.

This is a sharp looker as well as a good player. PRICE LOWERED!!! Looking for $750 for cue. Cue will include a 1x2 Imperial Case.

I don't check internet daily, so feel free to call if you need immediate response (714) 875-9324.
 

Attachments

  • cameron whole2.JPG
    cameron whole2.JPG
    54.6 KB · Views: 753
  • cameron joint2.JPG
    cameron joint2.JPG
    56.9 KB · Views: 387
  • cameron butt2.JPG
    cameron butt2.JPG
    67.1 KB · Views: 375
Last edited:
running said:
Custom made Barry Cameron Cue
3 Hi and 3 Low Ebony points into Highly Figured Bird?s Eye Maple
Red and Black Veneers that really add a nice accent
Soft and supple Ostrich leather wrap
Ebony Butt with 6 Ivory Diamond Inlays
Ivory joint and Ivory Butt Cap
Butt portion is 29.25 inches long

Shaft is custom made by Judd Fuller
30 inches long with his upgraded "Efren Reyes" taper
approximately 12.25 ? 12.5 mm tip

Total weight feels like 18.5 - 19 oz. I don?t have a scale to measure.
Well balanced. Balance point is about 19 inches from butt end.
Condition is very good. There are 2 minor chips in the finish smaller than a bb and the rubber bumper has seen better days.

This is a sharp looker as well as a good player. Looking for $800 for cue. Will entertain offers as low as $700. Cue will include a 1x2 Imperial Case.

I don't check internet daily, so feel free to call if you need immediate response (714) 875-9324.

what a beautiful cue. I am interested. PM to follow.
 
if anyone needs a reference i had a transaction w/ camargored a few months back.
 
Have you measured the shaft yet? It's a big difference between 12mm (which is what I believe is Efren's tip size), 12.25mm, and 12.5mm.
 
12 squared,

Thanks for asking. I don't have a measuring device to measure. I'm going by what Judd Fuller told me the measurements are. I will email Judd for the measurement and post the reply. Personally, I think it feels closer to 12.25 than 12.5.

I should add that it was made about 3 months ago and only hit with for about 3 to 4 hours. So it's condition is almost new.
 
Last edited:
I emailed Judd about Efren's taper and his response is below

From: Judd's Custom Cues
Sent: Tue 5/13/08 6:16 PM
To: Don Liv

Yes it is 12 1/4mm.
 
one last bump

i'm surprised that this cue isn't sold yet.

this is a great looking cue and great hitting cue at a great price.
 
Back
Top