PDA

View Full Version : Need help on identifying this Schon


TheDragon
06-22-2010, 09:27 AM
I'd like to know which period was this Schon made and what kind of joint is it, can a current 5/16x14 schon shaft fit it ? The joint looks a little different from the current Schon joint. Can the weight be adjusted? What's the current market value for it ?

Please see the pictures below.

Thanks.

Tommy-D
06-22-2010, 09:36 AM
> That is an early-mid 90's Schon. Evan experimented with that pin for a while. It just has a different shape to the end of the pin,the threads are the same undersized .302-14 that they've always used,just a little smaller than the true 5/16. A new Schon shaft should fit it just fine. The weight is USUALLY adjustable,no way to find out without taking the bumper out.

I'd think 3-400 or maybe a little more is about right with one shaft. Tommy D.

TimKrazyMon
06-22-2010, 10:59 AM
Looks like an STL-2 with the old style stitched rings.

J Layer
07-03-2010, 12:56 AM
I'd say it's a stl-2 made close to 92-94ish.Value if straight and clean I'd put it at the $300 range.IMO.