PDA

View Full Version : predator weight removal


PhilosopherKing
10-20-2017, 12:37 PM
How can I remove the weight from a Predator if I don't have the silly proprietary tool?

Thanks

DEXTER
10-20-2017, 05:25 PM
I use a pair on needle nose pliers. Snap ring pliers work too.
I've heard of using a old fork and cutting 2 tines off.

PhilosopherKing
10-20-2017, 09:05 PM
thanks..............

Celophanewrap
10-20-2017, 11:10 PM
I use a pair on needle nose pliers. Snap ring pliers work too.
I've heard of using a old fork and cutting 2 tines off.

This is what I was told by Predator, worked out great

blairlazz007
10-26-2017, 09:00 AM
I made a tool before later buying the weight kit.
2 pieces of 1/2"x1/8" stainless steel flat bar, welded to make a T.
I ground out 2 pins from the end of the T leg to fit the holes in the weights.
Job done, and sits nice & flat in your cases jump cue pocket.


Sent from my iPhone using AzBilliards Forums