AzBilliards.com

AzBilliards.com (https://forums.azbilliards.com/index.php)
-   Ask The Cuemaker (https://forums.azbilliards.com/forumdisplay.php?f=22)
-   -   Mali Pin Size (https://forums.azbilliards.com/showthread.php?t=502605)

14.1'er 11-17-2019 05:44 AM

Mali Pin Size
 
I'm hoping a maker can answer this question.

A friend has a Mali with a piloted steel joint which looks to be a 5/16x14 pin, but a standard 5/16x14 OB shaft will not thread on. The thread pitch matches to 14 but is the pin slightly oversized on Mali? Any help is greatly appreciated.

Michael Webb 11-17-2019 07:09 AM

Quote:

Originally Posted by 14.1'er (Post 6520900)
I'm hoping a maker can answer this question.

A friend has a Mali with a piloted steel joint which looks to be a 5/16x14 pin, but a standard 5/16x14 OB shaft will not thread on. The thread pitch matches to 14 but is the pin slightly oversized on Mali? Any help is greatly appreciated.

Mali originals used a couple of different joint screws. One of the most popular was a .298x14 quick release and 3/8x10. Do you have an old Mali or a new one made over seas. Either way it could be an easy fix if you take the drive to R. I.

14.1'er 11-17-2019 08:00 AM

Hey Mike,

It's not my cue, it's a buddy's. The cue is at least 20 years old. When his shaft comes and it doesn't fit, he'll have to bring it to you.


All times are GMT -7. The time now is 12:15 PM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity (Lite) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.