Search results

  1. Kim Bye

    New Superior Cues Leather Wrap Styles!

    The new wraps looks great 😎
  2. Kim Bye

    What air compressor are you using?

    A regular speaking voice is about 60db, a washing machine is about 70db, a vacuum cleaner is in the 75db range. So even if it doesn't sound like a drastic difference, if it's an enviroment you spend a lot of time in, there's quite a difference between 70db and 60db. A regular piston compressor...
  3. Kim Bye

    Tip popping off

    It's all in the preparation, not only do you need a fresh bottle of a quality CA, you need to make sure the ferrule is faced off nice and flat, prep the tip and sand the base flat. Then clean both surfaces with denatured alcohol, then glue the tip on with the right amount of force. When trimming...
  4. Kim Bye

    Converting to wrapless handle

    I would never take on such a job, just too much aggravation. I think you'll find that most cue makers will give you the same response. If you want a wrapless cue with a curly or BEM handle, have one made.
  5. Kim Bye

    What air compressor are you using?

    If you want a quiet system that delivers plenty of air, you have to step out of the consumer and even the prosumer market. My compressor has a 200L tank, 3hp motor, airdryer all hooked up to a Prevost air line system. Cost was about $3000. The one I have seems to be sold all over Europe, I'm...
  6. Kim Bye

    Uni-loc pin thread size?

    The G10 then and aluminum ones certainly are skinnier than the steel and brass ones.
  7. Kim Bye

    Uni-loc pin thread size?

    Have you tried 3/8-11.5? If you use the search function, I think you'll find a thread with the exact specifications.
  8. Kim Bye

    Wood age?

    Whatever way the wood is dried, having it in your shop long enough to be climatized to your shop and thus giving you the chance to monitor weight and moisture content over time is always worth the effort. Some woods dries faster than others and some woods are more prone to splitting/cracking, so...
  9. Kim Bye

    making a cue more forward-balanced- ?

    Removing weight bolts, changing to a brass pin if that works on your cue and using heavier shafts is your options. But generally if you have a cue that don't suit you, get another that does... Tweaking something that's already made is always more difficult and there is always the chance of...
  10. Kim Bye

    Which glue do you use?

    For construction you use strong epoxy like West systems.
  11. Kim Bye

    So Mezz has a new joint pin

    I was pretty disappointed when I got the email from Mezz about the pin change. The explanation about shafts now is threaded phenolic etc. Is just a poor excuse. It reminds me of when Tiger switched from Radial to their proprietary 3/8-9 ACME pin.
  12. Kim Bye

    Radial Pin shafts getting quite tight

    Sounds like it might be a humidity issue. Any competent cuemaker will be able to help you, it's a very quick and cheap fix.
  13. Kim Bye

    Replicating production cue ringwork ?

    Not at all. I play with a simple merry widow, nothing fancy Purpleheart/BEM. 3/8-10 flat bottom brass pin. Which I obviously made myself. Not really sure I agree with your statement about the cue butt means very little, there's definently differences in feel and feedback depending on materials...
  14. Kim Bye

    Replicating production cue ringwork ?

    That's not for me to say, but seeing it's a starter 5280 cue, have someone change the threads on that OB shaft so it fits your 3/8-10 pin and put aside a few bucks here and there and save up to something that's truly yours. In my experience people tend to tire of those production cues pretty...
  15. Kim Bye

    Replicating production cue ringwork ?

    Good luck with that... It's both difficult and expensive. not worth it for an old beat up OB-1 shaft.
  16. Kim Bye

    Does anyone know of a cuemaker/cue repairman in Vienna Austria, or anywhere in Austria? TIA

    I'm not in Vienna, but I'm in Europe, maybe I can help?
  17. Kim Bye

    Software

    Kelly's software works like a dream.
  18. Kim Bye

    Tapered reamer for coring?

    Are you talking about their wood glue? In that case I think Titebond III is the better choice, that stuff is incredibly strong. I use it for other wood projects. As for PU glues Titebonds PU glue seems to be a stronger PU glue than Gorilla.
  19. Kim Bye

    11.75 vs. 11.8

    Yes it's silly .05mm want make any difference at all. When it comes to arguments from big production companies, I would be inherently sceptical. The claims made by the big brands is a source for much of the confusion about equipment. Even though cues are made with different woods, plastics and...
  20. Kim Bye

    Tapered reamer for coring?

    Pratt Burnerd KC15 collet chuck and collets works great.
Top