Search results

I meant to send a pm Sorry.....

Here are couple of my new sanding mandrel batch, with all stainless steel body and the grinding was all done on my new OD grinder done all between centers as a set, the measured runout on the OD grinder is 0.00015". All the set that I made so far are perfect. I currently have 3 sets of 3/8-10...

Here are couple of my new sanding mandrel batch, with all stainless steel body and the grinding was all done on my new OD grinder done all between centers as a set, the measured runout on the OD grinder is 0.00015". All the set that I made so far are perfect. I currently have 3 sets of 3/8-10...

Thanks for all the kind remarks, I am glad someone appreciates all the hard work and countless hours that I have spent in designing and building those lathes. Regards

Scott Thats not a penn state motor or controller, I haven't used a penn state motor for a while now, nor I plan to ever using it again This is my 1/3HP DC motor with speed control and Rev switch. I have sold over 85 motors with only one return, which had a faulty switch only. Those motors are...

Here is the latest Cue Building Lathe I have built and shipped. The new features and improvements are: 4-sided taper bar 5" wide bindless carriage 1/2" wide heavy duty gear rack an pinion gear Independent gear driven lead screw Auto-Feed system For any questions please call me or email me. You...

Dick Thanks for the rules info update, but last I checked it wasn't a sales add, I never stated up for sale, I was simply showing the latest product improvement, but I did post a reply with a price range for the machine. Oh well AZ was a good window for me, I guess I will just update my website...

Mr Wilson What happened to my Cue building Lathe post, it's gone, I would sure like to know why it was deleted. Thanks

My new carriages are 100% compatible with all Taig based cue lathes. My new H-channel will be available sometime next month. As of now, all my components will still work and fit any other taig based cue lathe. Just for clarification, here is a picture of the standard taig U-channel next to my...

Tommy besides the UHMW interface on my carriage and the extra width, its fully compatable with a taig carriage, you can still use 2 slide stacked up along with A2Z QCTP. The base on my carriages sits only 1/16" higher than the base of a taig carriage, standard tool posts will be supplied with...

Happy Holidays To you and you family, and to all my friends and customers too.

Bryan Thanks for all the suggestions As a mentioned I my last post about the redesigned H-channel, I did add a full track on the H-channel for a dial indicator, so it can be positioned anywhere along the bed, I am working on a special dial for the carriage that will measure how true the bed is...

Gary I appreciate your input, but as I mentioned above, the 2 main design advantages on this carriage are, wider and much more snug tight fit to the bed ( no wiggle) for much more repeatable accurate results, second is the no binding and no ware to the anodized dovetail, which will also result...

Thanks scott and everyone who commented. I will try answering everyone's concerns. Those carriages will be available in both right hand or left hand slide. The right hand slide only works with the tall headstock models only. The gear rack will be covered for now, once my H-channel die is...

As you all know, I have been working on a new carriage for taig base dovetail. This carriage has by far met an exceeded my expectations, for smoothness redgidity and the effortless moving motion it requires. this carriage will not only provide much higher snugg fit to the dovetail than the...

Joe You need to grow up, enough with all the immature childish comments. As much as I want to reply to your quote, I would rather just take the hi road on this one. Mr. Wilson replied to back up my suspicion and that's good enough for me, by the way I forgot to mention another red Flag from PMS...

Good luck finding someone stupid enough to fall for this scam. I am pretty sure you don't have any of those router. Asking for only money orders with the name left blank is a very very big red flag for scams and now you post no pick up, or COD either, why no pickup, is it because you don't have...

Well I know that we can taper them now, but since they are going to be ground as a set, I am not sure 100% if he can do selective tapering on one side only, it sounds doable, but will need to verify that for sure Regards

The ones in the pictures are at finished size and were shipped out last week, all the ones I have left are pre ground to 0.860" and will be custom ground per customers specification. You can get a set at 0.850" any time, once those 12 sets are sold, I will be making 30 more sets. Now that I...

Here is the latest batch of carbide sanding mandrels. The design is fully refined and perfected. Those are all Made with stainless steel body and the highest grade of American made Tungsten Carbide tubing sleeve Those come with money garauntee. I started out with a small batch. I have 3 sets of...