Search results

  1. blackhawk357m

    Pricing 6' dovetail lathe bed.

    Hi, I'm trying to find a piece of 6' dovetail. I've tried Google, the search here, metal supply stores. I just can't find it. There has to be a supply store or somewhere to get it. I've already got a price from Chris, looking for other options as well. TYIA, Nathan Brugmann
  2. blackhawk357m

    Motor going out or brushes?

    I don't have pics, can't figure how to load a vid. But I was doing alot of sanding and have had the motor since 2009. Its a DC 1/2 hp? motor, it started sputtering acting like it didn't want to spin, and in the back you can see spark flashes through the air slots. Opinions? Tyia, Nathan...
  3. blackhawk357m

    Is an explosion proof fan needed?

    I've been using a HVLP spray gun with a water based urethane. Would a regular wall mounted exhaust fan be ok for the overspray, or would I need an explosion proof fan? TYIA, Nathan Brugmann
  4. blackhawk357m

    WTB Huebler Brown Rubber Bumpers

    Just like the title says. I'm looking for 2 bumpers. Anybody have any or know where to get them? Tyia, Nathan Brugmann
  5. blackhawk357m

    WTB: 1.5x18" Tulipwood

    Just as the title says, wanting to buy an 18" long by 1.5" square of tulipwood. Let's see what ya got! Thanks, Nathan Brugmann
  6. blackhawk357m

    FS: Mid America Pool Upgraded Lathes

    Sold Lathes have sold
  7. blackhawk357m

    Amboyna Burl & Koa Questions

    I have never used either of these woods till now. I am building a cue using a cored amboyna burl forearm and sleeve, with a cored koa handle. My 2 questions are: 1. The amboyna is developing a whitish color "film" on it. If I wipe it off with den. alcohol and epoxy seal coat it...will it...
  8. blackhawk357m

    Heat lamps and finishing...

    I just bought 2 halogen work lamps (150 watt ea). I plan on setting them close to the cues on my finishing lathe. I was just curious on how far away the lamps should be away from the cue, and about how long the cue should be heated before applying epoxy finish? Thanks for any help and...
  9. blackhawk357m

    Inlay Epoxy Question

    It's my 1st time doing inlays on a cue. The material used for the parts is Ivory Juma. Should I use a white pigment epoxy to glue them in, or an ivory/cream color epoxy? And what pigment would be best to use for both the white and the ivory color? I did use the search function on here...but...
  10. blackhawk357m

    Coring dowel diameter not consistant after a pass

    I am using a Cue Smith Deluxe lathe with a power feed, Ridgid router, Todd's router mount with a 6 wing carbide cutter. Using the ground pin in the headstock that came with the lathe to check runout (@ about .001) I loosened the tailstock drill chuck and tightened on the headstock pin, then...
  11. blackhawk357m

    Cue coring with Birch?

    Has anyone used Birch to core their cues as opposed to using Hard Maple? I grabbed this screenshot from workshopcompanion to see how much of differences there was. Pros...cons? I would really appreciate any advice and thoughts, thanks guys!
  12. blackhawk357m

    Amboyna Burl Question

    Buddy of mine just picked up a 18" long square of amboyna burl. Moisture content is at 6%, plan on coring it. Should amboyna burl be stabilized first? If so, who would be the "go to" to have it done? Thanks in advance guys!
  13. blackhawk357m

    Blue transtint dye

    I dyed a piece of curly maple with the blue transtint dye. it's mixed 1/8oz dye to 4oz denatured alcohol. Let it sit to dry for 24 hours. Went to apply CA for the finish and I'm getting blue dye on my paper towel and it seem like the ca is not wanting to dry very fast at all. I've used other...
  14. blackhawk357m

    m26 x 0.5 tap needed

    I'm looking for a machinist or someone that can make me a m26 x 0.5 right handed bottom hand tap. Please contact me if you or you know of someone that can do this. :thumbup: Thanks, Nathan Brugmann
  15. blackhawk357m

    Huebler Prototype cue...Take 2!

    The original buyer was not able to complete the transaction due to personal reasons. So I relisted the cue, with a lower Buy It Now and Reserve Price. http://www.ebay.com/itm/331211932849?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649 Hopefully I can get this beautiful piece sold this...
  16. blackhawk357m

    Prototype Heubler

    Prototype Huebler for sale on ebay. Here's the pics of it:
  17. blackhawk357m

    WTB: Black with Red Speck Irish Linen

    Just enough for 1 cue. Don't want to have to go to Atlas and pay crazy shipping prices for just this little bit. Thanks guys! Nathan Brugmann
  18. blackhawk357m

    Stainless Butt Caps

    I've seen these on various cues, but was wondering does anyone supply them? Been looking for quite awhile and I can't find them on the normal supply places. Any ideas as to where to get them from? Nathan Brugmann
  19. blackhawk357m

    Transtint Dyes

    For all you guys that use Transtint dyes. I was just at my local Rockler today and noticed the Transtint dyes are all on sale for 40% off. $12.59 per bottle. I think the sale lasts till the end of the month. I just wanted to let people know :grin: Nathan Brugmann
  20. blackhawk357m

    Anyone try Inlace Acrylester?

    I'm close to finishing a cue for my girlfiends daughter, and she wanted something toxic green so I found inlace acrylester. Wanted to know if anyone has tried using this stuff in a cue? I have it cored with maple. Now I just need to finish the shaft lol Nathan Brugmann
Top