Search results

  1. deadbeat

    Funny pic/gif thread...

    When they live away from the coast they will, at the people who like to live by the ocean.
  2. deadbeat

    Ball cleaner project

    That makes my buffer in the bucket look very, very bad. Nice work.
  3. deadbeat

    Cut a house cue

    Dang, got asked to cut a house cue, had a ring middle way. I told the owner it likely had a bolt there, it did. I cut it fine. I drilled it and bored it, almost done and boring bar sent last 1/16 threw the side of the butt. What did I do wrong? I ran a 1/4 end mill, then the boring bar.
  4. deadbeat

    Motor Controller

    My motor controller died on my mid america lathe. I bought another resistor and replaced the bad one and it burnt back out again. I talked to Todd and he told me what a new one costs. My question, my old one did last 9 years, but is there something better I should buy or just get another like I had?
  5. deadbeat

    Sneaky Shaft too white

    Guys help me out, I have a shaft nearly finished on an old conversion sneaky, one I took the finish off of and am ready to apply finish to the shaft and the butt. The problem I am seeing is the shaft is way too white for it to look good to me. Is there a way to yellow the maple shaft some, maybe...
  6. deadbeat

    Joe Barringer DVD's

    All 10, SOLD shipped, first post gets first chance, I'll PM you. I forgot to mention, I would be willing to trade for some equipment.
  7. deadbeat

    Cue Building Disc

    30 bucks shipped, first post gets it, I'll PM you if you are first.
  8. deadbeat

    Question for fellow repair people

    I had the same error when I clicked the name, seems you have to click the arrow to the far right.
  9. deadbeat

    Bye Bye Scroll Chuck

    I think I will like this much better than the scroll chuck.
  10. deadbeat

    Atlas TH-54 Halfnut assembly

    I have the half nut assembly from an atlas th54 I would like to sell. I has the ball, spring, both half nuts, and handle. I think these are the part numbers : 9-13,10D-38,10-29,9-61,9-210 & 9-62 x 2. I would like SOLD if anyone can use it but am up for best offer.
  11. deadbeat

    3/4" gundrill F/S

    I told a couple people I would post pics of how I made a couple of these bits work for my taig. I cut pieces off an old brass punch, that's why it looks a little rough. I made these pieces on my large bore headstock. With the threaded air fitting I don't have to worry about epoxy.
  12. deadbeat

    Christmas presents

    Presents for niece and nephew. I am not good a taking pictures, the coco really had a lot of figure. oh well.
  13. deadbeat

    Tired of Masking

    I got tired of trying to mask the bottom of the shaft and the top of the butt when shooting auto clear so I made these little delrin spacers on the last 5 that I cleared and they worked great. Just wondering if anyone else does anything like this?
  14. deadbeat

    A few almost ready for finish

    Finally got these finished.
  15. deadbeat

    A few almost ready for finish

    A few almost ready to finish.
  16. deadbeat

    WTB Boring Bar

    I am looking for a boring bar to do my pins with. I'm guessing I need something around 1/4 by about 2.5 inches bore depth. Not having much luck after looking for a while. Does anyone have anything like this that they would want to sell or any recommendations?
  17. deadbeat

    Spring loaded carriage for taig WTB

    I guess if I would pay attention I wouldn't have to ask so many questions.:confused:
  18. deadbeat

    Hightower DVDs

    I have the following Chris Hightower DVDs I would like to sell. 1. Advanced Cue Building : Points and Inlays 2. Advanced Cue Building : Cue Assembly, Boring, Coring, Tenons and more. 3. Basic Cue Building: Includes tips, ferrules, reconditioning, shafts,wraps,tapering, joint work and more 4...
  19. deadbeat

    WTB Solid Brown Irish Linen

    I can't seem to find a solid brown Irish Linen. I need a dark brown similar to the walnut brown at Atlas. I don't care if you only have large or small roll, I just need enough to do 1 cue but will buy more if needed. I have checked atlas, prather, schmelke, mueller, and a couple google searches...
Top