Search results

  1. GBCues

    Wood filler?

    Bore it out clean, then glue in an extra long plug. After the glue/epoxy dries, turn down the extra length to form a new tenon. Don't use wood filler.
  2. GBCues

    Stress Marks on Scorpion Shaft?

    Hey Guys, A friend/customer asked me about these marks on his Scorpion shaft - see below. They showed up mysteriously last week. He thinks he can feel the finish lifted slightly - I couldn't feel anything. I'm not familiar with Scorpions so thought I would ask here. Has anyone seen this before...
  3. GBCues

    Happy 4th of July!!

    Happy 4th to all the members of this forum. I hope you have a fun and safe holiday. Gary
  4. GBCues

    ER-11 vs ER-11A Collet Nut

    Hey Guys, I have a 48VDC air-cooled spindle on my CNC inlay machine. It has a "ER-11" collet holder on it. It indicates pretty well, but I thought I would enhance that by getting one of Precise Bits ER-11 precision collet nuts. Well, little did I realize there is an ER-11 nut and an ER-11A...
  5. GBCues

    CNC Air Blower Source?

    Hey Guys, A while back, and I'm embarrassed to say how long back, I built myself an inlay machine. See post 43 in the below link for pictures: http://forums.azbilliards.com/showthread.php?t=339520&page=3&highlight=cnc%2Cinlay I'm finally getting around to learning how to use it and have cut...
  6. GBCues

    Are There Any New CNC Controllers Out There?

    Hey Guys, There used to be some discussion of CNC here, but it has faded lately. I've got a 2-axis DIY taper shaper that I made. The computer is Windows 7 32-bit, running Mach3 driving a Gecko G540 from the parallel port. It works fine, but updates to Windows 7 are getting few and far...
  7. GBCues

    McDermott Quick Release Removal

    Hey Guys, A friend has a McDermott with a quick release SS collar/pin assembly that is slightly loose. It will turn approximately 5-10 degrees with a "click" at each end of the twist. I can't get it to turn any further by hand. With a shaft attached, when it unscrews that little bit, it...
  8. GBCues

    AutoDesk Fusion 360

    Hey Guys, I just wonder if anyone else has been looking into AutoDesk's Fusion 360 CAD/CAM software? It looks to me like a viable alternative to BobCAD-CAM. Just wondering what others thought. Thanks Gary
  9. GBCues

    Caveat Emptor

    Guys, There's a "repair lathe" for sale on eBay http://www.ebay.com/itm/Pool-Cue-repair-lathe-/201597633828? Please note the location information: Shipping: $80.00 Standard Shipping | See details Item location: Watkins Glen, New York, United States Ships to: United States Delivery: Estimated...
  10. GBCues

    Cue and Shaft ID?

    Hey Guys, A player on my league team bought this cue recently. I don't think it's an Asian import or I wouldn't bother you, but if so, I apologize. He bought the shaft and the butt as a cue, but I don't think they were an original pairing. Any info on the shaft or the butt is appreciated...
  11. GBCues

    Royce Bunnel - RIP

    I'm not sure where exactly to put this, but I just read about this on another cuemanker site: https://www.facebook.com/obcues/posts/1101033999908203 What a sad loss! Gary
  12. GBCues

    Bob-CAD v24 on Windows10?

    Hey Guys, Just wondering if anyone is running BobCAD-CAM v24 on Windows10? I talked to tech support and they said they had customers running it without problem, but they haven't tested it. Windows7 is getting a little long in the tooth, so I thought I would upgrade. I suppose if it screws up...
  13. GBCues

    Lathe Safety - NOT

    https://video.fsnc1-1.fna.fbcdn.net/hvideo-xpf1/v/t42.1790-2/11884802_464712310376939_852917449_n.mp4?efg=eyJybHIiOjM3NiwicmxhIjo1MTJ9&rl=376&vabr=209&oh=77a6269c1a3927d98b324ef3da7486dd&oe=55E0D0DA This was posted on another cuemaker site - thought I'd remind folks what can happen. Gary
  14. GBCues

    A2ZCNC Sale

    I think a lot of you use A2ZCNC's QCTP's but may not be on their mailing list. I got an email from them overnight. They are running a 25% off sale on all merchandise in stock. FYI Gary (I am not associated with A2ZCNC) From the email I got: Summer is winding down, the Winter months are coming...
  15. GBCues

    Meucci Cue In For Repair - Ivory?

    Hey Guys, I got this Meucci in for repair - the butt cap came unglued. I got to looking at it closer - is it ivory or old plastic? I don't see much ivory in this part of the world, so I'm not familiar with it. Thanks for any help or ID. Gary http://forums.azbilliards.com/showthread.php?t=393311
  16. GBCues

    Meucci Grey-Stained Maple, Green Arrow-Heads, Ivory Cue - Model?

    This cue came into my shop for repair - the butt cap had come loose. I got to looking at it closer, and I believe the white in the cue is ivory. I searched through the Meucci archives, but couldn't find anything like it. Does anyone have an ID for it? Value? It's not terribly important, but...
  17. GBCues

    Got Wood? This Guy Does!

    Hey Guys, I know it's a little on the borderline to refer eBay auctions here that aren't your own - I know that some times in the past I thought I had found an auction that few others knew about and didn't appreciate it getting exposed because that just bumps up the bids. However, this one...
  18. GBCues

    Cross-Threaded Woe

    Hey Guys, A customer contacted me this week, he had a cue that he somehow cross-threaded when taking it apart and wanted to see if I could fix it. When I first saw the cue, I gave it a moderate twist in both directions and it does in fact seem pretty locked up. i asked him "Just how hard have...
  19. GBCues

    APA Nationals - Las Vegas?

    Hey Guys, I'm going to the APA 9-Ball Nationals with my team tonight for a week. I was wondering if anyone else will be there - I've never met most of you, it would be neat to put a face with a name. Let me know here or via PM, Gary
  20. GBCues

    4-Axis CNC Router on CraigsList

    Hey All, This listing came up over the weekend. It's bigger than necessary for cue work, but otherwise looks well built. http://denver.craigslist.org/tls/4554492352.html There's a lot there for the asking price IMHO. I haven't seen it, nor have I spoken with the seller. We've exchanged a...
Top