Search results

  1. Bill the Cat

    Shielded wire for limit/home switches

    I'm helping a friend setup a Taig CNC Mill. I'm looking for shielded wire to use for the connection of the limit/home switches. I found this source on line and was wondering if this is the preferred size and would provide adequate shielding for wiring these switches...
  2. Bill the Cat

    Break tip installation

    My system for White Diamond tip install FWIW, I always had a hard time getting White Diamonds to stay on no matter how much roughed them up and/or what glue I used. I always attributed the lateral forces of off-center breaks were the cause. Here's crude sketch of my solution. It's a...
  3. Bill the Cat

    Looking for new inexpensive break cue with leather tip (not phenolic)

    I may have a couple..... ....it depends on what you consider inexpensive. I have two custom break cues with purpleheart shafts and canvas phenolic ferrules. One has a Porper RAM (composite, not leather) tip and the other has a White Diamond (not leather, but not phenolic) tip. I'm asking...
  4. Bill the Cat

    400 to spend

    How about a CAT cue? I have a number of cues at or below what you have in Paypal. Here are just a few. Let me know if anything catches your eye.
  5. Bill the Cat

    LTB Purple Heart shafts

    I've got a couple I have two break cues for sale that both have purpleheart shafts. They have natural canvas phenolic joints and ferrules. One has a Porper Ram tip and the other has a Hard Water Buffalo tip. I would consider selling just the shafts for $110 each (plus shipping).
  6. Bill the Cat

    WTB Wrapless/Non-Steel Jointed Cue

    CAT customs I've got a few that are well below your budget. If you see something you like, I can provide more pics and full specs.
  7. Bill the Cat

    Red to maroon

    Sealing Redheart Hi Kelly, I seal all my wood (not just Redheart) after each cut with Zinsser Seal-Coat cut 50/50 with Denatured Alcohol. I don't know if this is the reason, but my Redheart maintains it's color pretty well.
  8. Bill the Cat

    For Sale: Cueman Videos

    I've got two of Chris's videos. Basic Cue Building and Repair (VHS) Advanced Cue Building: Points and Inlays (DVD) Asking $45 shipped for both.
  9. Bill the Cat

    LTB Custom Break Cue

    CAT Custom Break Cues I've got two right now. Both have purpleheart shafts. The Bocote is 20 oz. and the Redheart is 18.35 oz. Asking $250 for each If either one interests you, I can provide more pics and full specs.
  10. Bill the Cat

    For Sale: Turnkey 4 Axis Taig CNC for Inlays

    Complete and ready to start cutting inlays. Taig 2018 CNC ready mill Gecko 540 controller for 4 axes of control Wired with Limit/Home switches and E-stop Wolfgang Precision Spindle Fully licensed Mach3 control software BOBCAD V19.0 for design and gcode generation Dell 8200 computer to run it...
  11. Bill the Cat

    WTB-good playing cue

    CAT custom cue I've got one that might interest your friend. Asking $225 shipped in the CONUS. Specs: 19.6 oz. (15.8 butt /3.8 shaft) balanced 18 1/4" from butt cap 13mm dia. tip .850" dia. joint (White Phenolic) 1.245 dia. Butt cap (White Phenolic) 3/8-10 joint pin Titan ferrule Triangle Tip...
  12. Bill the Cat

    Looking for a break cue

    Custom break cues I've got a couple that I've made just for breaking with Purpleheart shafts. Let me know if anything catches your eye. I can give you more pics and full specs. Asking $260 shipped in the continental US.
  13. Bill the Cat

    What does a cuemaker play with?

    An early CAT cue I've been playing with this one since I made it back in 2009.
  14. Bill the Cat

    LF: 3/8 x 10 Merry Widow/Plain Jane wrapless butt

    CAT custom cue I've got one that might work for you. I used it for my break cue before I made some custom breaker's. It's in excellent shape. I'm asking $265 for the whole cue, but I'd sell just the butt for $165 Specs: 19.2 oz. balanced 18 1/2" from butt cap 13mm dia. tip .850" dia. joint...
  15. Bill the Cat

    looking for decent break cue

    CAT cues custom breakers with Purpleheart shafts I've got a couple. Asking $250 each Specs: 20.0 oz. (15.35 butt /4.65 Purpleheart shaft) balanced 19 1/2" from butt cap 13.3mm dia. tip .850" dia. joint (Black Thermoplastic) 1.250 dia. Butt cap (Black Phenolic) 3/8-10 joint pin Canvas Phenolic...
  16. Bill the Cat

    WTB Cue with highly figured wrapless handle.

    How about a CAT custom cue? These aren't exactly what you described, but let me know if one interests you. I can send more pics and full specs.
  17. Bill the Cat

    Feeler***$250~$350

    Custom CAT cue This is the only one I have that is that heavy (20 oz.). Normally, this cue would go for $370, but there is a defect in the butt sleeve inlays. If you are interested in the cue, I'll explain the defect and provide more pictures. I can let you have this one for $270 shipped...
  18. Bill the Cat

    WTB: SNEAKY PETE or Plain Jane.

    No Sneaky Pete's, but a Plain Jane in your price range This is the only one I have for $250. Specs: 19.6 oz. (15.8 butt /3.8 shaft) balanced 18 1/4" from butt cap 13mm dia. tip .850" dia. joint (White Phenolic) 1.245 dia. Butt cap (White Phenolic) 3/8-10 joint pin Titan ferrule Triangle Tip...
  19. Bill the Cat

    WTB: 3/8-10 Butt / cue

    CAT custom cues I've got a number of wrapless cues at the moment. These three are the only ones with any green in them. If you see something you like, let me know and I can send you more pics and full specs. I can also show you the other wrapless cues I have if you'd like. Just let me know.
  20. Bill the Cat

    looking for the best used $250 cue

    New custom CAT cue If your friend can come up with a few more dollars for shipping, I've got a brand new custom that he may like. It's 1/2 ounce under his minimum weight, but I've always found that balance is more important than weight. I'm asking $250 and the shipping usually runs $15 to...
Top