AzBilliards.com - View Single Post - 5/16-14 Atlas brass insert install?

pip9ball · 11-11-2019, 11:26 AM

*Update*

I was able to get a tight fit by opening up the insert a few thousandths with a boring bar and chasing the threads with a tap.

Note, I also had to trim the diameter of the insert pilot down to 9.02mm as this is the size of the counter bore on the mezz united butts.

Thanks to all for the help!

-Phil

	(#19)
pip9ball AzB Silver Member Status: Offline Posts: 427 vCash: 500 iTrader: 7 / 100% Join Date: Apr 2006 Location: El Dorado Hills	11-11-2019, 11:26 AM Update I was able to get a tight fit by opening up the insert a few thousandths with a boring bar and chasing the threads with a tap. Note, I also had to trim the diameter of the insert pilot down to 9.02mm as this is the size of the counter bore on the mezz united butts. Thanks to all for the help! -Phil