JC
Coos Cues
Your pocket finish looks really good. Can you wrap the pockets on any table with any cloth like that without exposing any cuts at the bottom?
JC
My installations and Restorations.
- Thread starter trentfromtoledo
- Start date
Your pocket finish looks really good. Can you wrap the pockets on any table with any cloth like that without exposing any cuts at the bottom?
JC
I am still fairly new, I would not say ANY Table.
I am really trying hard to not shoot myself in the foot and say ANY table LOL!!!!! I am pretty comfortable with my pocket work(sides being the most difficult) on Gold Crown's and other older Brunswick tables using Simonis or similar worsted cloth's. As of late I really do not do much table maintenance at all. I am staying focused on vintage tables for restorations. On the road now pickin up 2 Gold Crown 2's and a Brunswick Centurion today.(<<<I know its not vintage but the price is RIGHT!) Have Gold Crown 4 sales in Manhattan & L.A. and a Anniversary model D-C in Delaware over the next month or so and I will be posting them up as they get completed!! Thanks for the nice comment on my pocketwork and for looking at my photo album.
Trent from Toledo
I am really trying hard to not shoot myself in the foot and say ANY table LOL!!!!! I am pretty comfortable with my pocket work(sides being the most difficult) on Gold Crown's and other older Brunswick tables using Simonis or similar worsted cloth's. As of late I really do not do much table maintenance at all. I am staying focused on vintage tables for restorations. On the road now pickin up 2 Gold Crown 2's and a Brunswick Centurion today.(<<<I know its not vintage but the price is RIGHT!) Have Gold Crown 4 sales in Manhattan & L.A. and a Anniversary model D-C in Delaware over the next month or so and I will be posting them up as they get completed!! Thanks for the nice comment on my pocketwork and for looking at my photo album.
Trent from Toledo
Sunday June 16th 2013, Mahopac Lake, New York
Sunday, June 16th 2013, Mahopac Lake, New York.
http://forums.azbilliards.com/album.php?albumid=1481
First of the Gold Crown 4's to go out. Went real smooth. Beautiful area! Connecticut is next!! Then Detroit! Then..... It just keeps going! Thanks for looking at my photos!
Trent from Toledo (419)491-7476
Sunday, June 16th 2013, Mahopac Lake, New York.
http://forums.azbilliards.com/album.php?albumid=1481
First of the Gold Crown 4's to go out. Went real smooth. Beautiful area! Connecticut is next!! Then Detroit! Then..... It just keeps going! Thanks for looking at my photos!
Trent from Toledo (419)491-7476
Just an idea here, but new jobs should have new treads
continuing to add to one thread makes the new work obscured somewhat. Glen
I kinda like all of them in one spot.
I can keep track of them easy this way! maybe i will do some editing an dating on my photo album!
I can keep track of them easy this way! maybe i will do some editing an dating on my photo album!
Monday, July 1st 2013. Maumee, Ohio. 8 Foot Hercules Pool Table.
My most recent work
This was a Hercules 8 footer, well made, all wood. Newer slates are cut so round, much harder to do the full wrap, but, totally works. Check out the photo Album here:
http://forums.azbilliards.com/album.php?albumid=1481
Our Current Inventory: 6- 8 foot Gold Crown 4's, Anniversaries: 2- 8 foots, Oversized & 9 Foot. 8 foot Brunswick Viscount, 9 foot Sport King. 8 foot Centurion. 4- 9 foot Gold Crown 2's. Trent from Toledo (419)740-0133
My most recent work
This was a Hercules 8 footer, well made, all wood. Newer slates are cut so round, much harder to do the full wrap, but, totally works. Check out the photo Album here:
http://forums.azbilliards.com/album.php?albumid=1481
Our Current Inventory: 6- 8 foot Gold Crown 4's, Anniversaries: 2- 8 foots, Oversized & 9 Foot. 8 foot Brunswick Viscount, 9 foot Sport King. 8 foot Centurion. 4- 9 foot Gold Crown 2's. Trent from Toledo (419)740-0133
Bowling Green, Ohio.
http://forums.azbilliards.com/album.php?albumid=1481
Another nice job! Westport, Connecticut this weekend: Brunswick Anniversary model d-c going in! Will post pics when I get her done!
Trent from Toledo
http://forums.azbilliards.com/album.php?albumid=1481
Another nice job! Westport, Connecticut this weekend: Brunswick Anniversary model d-c going in! Will post pics when I get her done!
Trent from Toledo
Restored Brunswick Anniversary !!! Westport Connecticut!
http://forums.azbilliards.com/album.php?albumid=1481
My most recent restoration. Came out excellent, but, my photograhy is shit, pardon my french. The home owner promised me pictures once the room is completed. Great people to work for and what a wonderful opportunity to restore another 8 foot Brunswick Anniversary! I have a 9 foot Anniversary project starting this week for a gentleman in Dartmouth, Massachusettes! Working hard!
Trent from Toledo
Our Current Inventory: 6- 8 foot Gold Crown 4's, Anniversaries: 2- 8 foot & 1- 9 Foot. 8 foot Brunswick Viscount, 9 foot Sport King. 8 foot Centurion. 4- 9 foot Gold Crown 2's.
http://forums.azbilliards.com/album.php?albumid=1481
My most recent restoration. Came out excellent, but, my photograhy is shit, pardon my french. The home owner promised me pictures once the room is completed. Great people to work for and what a wonderful opportunity to restore another 8 foot Brunswick Anniversary! I have a 9 foot Anniversary project starting this week for a gentleman in Dartmouth, Massachusettes!
Working hard!Trent from Toledo
Our Current Inventory: 6- 8 foot Gold Crown 4's, Anniversaries: 2- 8 foot & 1- 9 Foot. 8 foot Brunswick Viscount, 9 foot Sport King. 8 foot Centurion. 4- 9 foot Gold Crown 2's.
So things have been a little slow over the past few weeks!
So things have been a little slow over the past few weeks. Happy to announce that is all coming to a halt! Getting the opportunity to work on someone else's Brunswick Anniversary restoration next Friday!!! Going over this thing with a fine tooth comb before I even get my tools loaded in. I know the guy in the Detroit area that did the work and I am excited/ honored to get a chance to do a better job!!!!!!!!!!! Taking off what ever cheap cloth that is on there, re-leveling the table and installing the Championship Tour Edition 30/30, not crazy about it being burgundy, but, that is not my call. I always suggest standard green or blue. I will post the before and after pictures. I also have another Gold Crown 2 restoration in process that is going to be BADASS: High Gloss black base and side aprons, re-veneered rails in walnut & black stain, new mother of pearl inlays and ALLL NEW CHROME!!! More pictures to come! Thanks for looking.
Trent from Toledo (419)740-0133
So things have been a little slow over the past few weeks. Happy to announce that is all coming to a halt! Getting the opportunity to work on someone else's Brunswick Anniversary restoration next Friday!!! Going over this thing with a fine tooth comb before I even get my tools loaded in. I know the guy in the Detroit area that did the work and I am excited/ honored to get a chance to do a better job!!!!!!!!!!! Taking off what ever cheap cloth that is on there, re-leveling the table and installing the Championship Tour Edition 30/30, not crazy about it being burgundy, but, that is not my call. I always suggest standard green or blue. I will post the before and after pictures. I also have another Gold Crown 2 restoration in process that is going to be BADASS: High Gloss black base and side aprons, re-veneered rails in walnut & black stain, new mother of pearl inlays and ALLL NEW CHROME!!! More pictures to come! Thanks for looking.
Trent from Toledo (419)740-0133
New pics are up!
http://forums.azbilliards.com/album.php?albumid=1481
1963 Brunswick Anniversary Model D-C. This table was IMMACULATE, has never been restored and in almost perfect condition!!!!!!!!!! The previous mechanic did a very good job of leveling and installing the "felt"(it was not cloth by any means). The owner hated the color he picked, wanted something high end that would play nicer. I use Championship products and I installed Tour Edition 30/30. The table plays awesome! Very happy client! I am very happy to get the opportunity to work on such a beauty of a table
Gold Crown 4 going in next Wednesday and a Completely restored Gold Crown 2 w/ new chrome at the beginning of next month! More pics comin up soon! Thanks for looking.
Trent from Toledo (419)740-0133
Our Current Inventory: 5- 8 foot Gold Crown 4's, Anniversaries: 3- 8 foot & 1- 9 Foot. 8 foot Brunswick Viscount, 9 foot Sport King. 8 foot Centurion. 3- 9 foot Gold Crown 2's.
http://forums.azbilliards.com/album.php?albumid=1481
1963 Brunswick Anniversary Model D-C. This table was IMMACULATE, has never been restored and in almost perfect condition!!!!!!!!!! The previous mechanic did a very good job of leveling and installing the "felt"(it was not cloth by any means). The owner hated the color he picked, wanted something high end that would play nicer. I use Championship products and I installed Tour Edition 30/30. The table plays awesome! Very happy client! I am very happy to get the opportunity to work on such a beauty of a table
Gold Crown 4 going in next Wednesday and a Completely restored Gold Crown 2 w/ new chrome at the beginning of next month! More pics comin up soon! Thanks for looking.
Trent from Toledo (419)740-0133
Our Current Inventory: 5- 8 foot Gold Crown 4's, Anniversaries: 3- 8 foot & 1- 9 Foot. 8 foot Brunswick Viscount, 9 foot Sport King. 8 foot Centurion. 3- 9 foot Gold Crown 2's.
9/19/2013: Gold Crown IV in Sylvania, Ohio!
http://forums.azbilliards.com/album.php?albumid=1481
This was my most recent customized Gold Crown IV project!!! My photo's are terrible, but, good enough to tell she is beautiful! First pool table for the owner, could not have picked a better table(maybe a gc5!) and he could not be happier. Thanks for looking!
Trent from Toledo (419)740-0133
Our Current Inventory: 5- Oversized 8 /Gold Crown 4's, Anniversaries: 3- 8 foot & 1- 9 Foot. 8 foot Brunswick Viscount, 9 foot Sport King. 8 foot Centurion. 3- 9 foot Gold Crown 2's.
http://forums.azbilliards.com/album.php?albumid=1481
This was my most recent customized Gold Crown IV project!!! My photo's are terrible, but, good enough to tell she is beautiful! First pool table for the owner, could not have picked a better table(maybe a gc5!) and he could not be happier. Thanks for looking!
Trent from Toledo (419)740-0133
Our Current Inventory: 5- Oversized 8 /Gold Crown 4's, Anniversaries: 3- 8 foot & 1- 9 Foot. 8 foot Brunswick Viscount, 9 foot Sport King. 8 foot Centurion. 3- 9 foot Gold Crown 2's.
Last edited:
It has been a while, I have been out of action!
I am back in action! Check out my most recent installation, it is a Brunswick Centurion w/ Simonis 860. On the lower end $$$ of Brunswick's because of the bit of particle board in the tables design. None the less it is a nice playing table!! It is very nice to be back to work after 3 weeks of non-work related life stuff! I have 3 9 foot Gold Crown IV's to install in Maryland in a couple weeks and will post pics
http://forums.azbilliards.com/album.php?albumid=1481
Thanks for looking!
Trent from Toledo (419)740-0133
If any other dealer's or mechanic's need's anything specific, I may have it! Call anytime to inquire about my inventory! :thumbup:
I am back in action! Check out my most recent installation, it is a Brunswick Centurion w/ Simonis 860. On the lower end $$$ of Brunswick's because of the bit of particle board in the tables design. None the less it is a nice playing table!! It is very nice to be back to work after 3 weeks of non-work related life stuff! I have 3 9 foot Gold Crown IV's to install in Maryland in a couple weeks and will post pics
http://forums.azbilliards.com/album.php?albumid=1481
Thanks for looking!
Trent from Toledo (419)740-0133
If any other dealer's or mechanic's need's anything specific, I may have it! Call anytime to inquire about my inventory! :thumbup:
Last edited:
3 new photos in the album!
Just back from Maryland, 3 tables in 3 days, was fun!
http://forums.azbilliards.com/album.php?albumid=1481
Thanks for looking!
Trent from Toledo (419)740-0133
If any other dealer's or mechanic's need's anything specific, I may have it! Call anytime to inquire about my inventory!
Just back from Maryland, 3 tables in 3 days, was fun!
http://forums.azbilliards.com/album.php?albumid=1481
Thanks for looking!
Trent from Toledo (419)740-0133
If any other dealer's or mechanic's need's anything specific, I may have it! Call anytime to inquire about my inventory!
Last edited:
Final Gold Crown 4 of the year!
Custom Matte Black Gold Crown 4, New black laminate top rails, new mother of pearl inlays, new gully pockets, all Silver Veined metal and Superspeed Cushions of course
http://forums.azbilliards.com/album.php?albumid=1481
I just want to say thanks to those on the AZ Mechanics forum who have helped me out over the last year! I have been working my ass off learning the trade and establishing my business. I really appreciate the support! LOT'S more tables coming up in the NEW YEAR!!!
Thanks for looking and I wish everyone a Merry Christmas and Happy New year!! :thumbup:
Trent from Toledo (419)740-0133
If any other dealer's or mechanic's need's anything specific, I may have it! Call anytime to inquire about my inventory!
Custom Matte Black Gold Crown 4, New black laminate top rails, new mother of pearl inlays, new gully pockets, all Silver Veined metal and Superspeed Cushions of course
http://forums.azbilliards.com/album.php?albumid=1481
I just want to say thanks to those on the AZ Mechanics forum who have helped me out over the last year! I have been working my ass off learning the trade and establishing my business. I really appreciate the support! LOT'S more tables coming up in the NEW YEAR!!!
Thanks for looking and I wish everyone a Merry Christmas and Happy New year!! :thumbup:
Trent from Toledo (419)740-0133
If any other dealer's or mechanic's need's anything specific, I may have it! Call anytime to inquire about my inventory!
GC IV Update!
Today I went back to work on / play on an install of mine from last week. I have decided on GC4 & GC'5s I will do the 2 piece pocket trim method. The shelf is so deeeep on the newer slates that I cannot make the full pocket wrap look the way I want it. I also took some better photos, notice the great looking new laminate on the rails and the Mother of Pearl Inlays !! Thanks to all the wonderful clients and other mechanics that have helped me!! HAPPY NEW YEARS!!!!!
Trent from Toledo
Custom Matte Black Gold Crown 4, New black laminate top rails, new mother of pearl inlays, new gully pockets, all Silver Veined metal and Superspeed Cushions of course
http://forums.azbilliards.com/album.php?albumid=1481
Today I went back to work on / play on an install of mine from last week. I have decided on GC4 & GC'5s I will do the 2 piece pocket trim method. The shelf is so deeeep on the newer slates that I cannot make the full pocket wrap look the way I want it. I also took some better photos, notice the great looking new laminate on the rails and the Mother of Pearl Inlays !! Thanks to all the wonderful clients and other mechanics that have helped me!! HAPPY NEW YEARS!!!!!
Trent from Toledo
Custom Matte Black Gold Crown 4, New black laminate top rails, new mother of pearl inlays, new gully pockets, all Silver Veined metal and Superspeed Cushions of course
http://forums.azbilliards.com/album.php?albumid=1481
Last edited:
Latest Installation !
Today's installation was in Bloomington, Indiana for a very cool client names Russ! 9 foot Gold Crown 3 w/ Simonis 860. Tuesday an 8 foot Sport King and next Friday an 8 foot Anniversary! Will post pics as they are completed!
Trent from Toledo (419)491-7476
http://forums.azbilliards.com/album.php?albumid=1481
Thanks for looking!
!Today's installation was in Bloomington, Indiana for a very cool client names Russ! 9 foot Gold Crown 3 w/ Simonis 860. Tuesday an 8 foot Sport King and next Friday an 8 foot Anniversary! Will post pics as they are completed!
Trent from Toledo (419)491-7476
http://forums.azbilliards.com/album.php?albumid=1481
Thanks for looking!
Medina, Ohio. Brunswick Sport King.
Todays installation was for very cool guy named Craig. He bought a pair of Brunswick Sport Kings and we installed one for him today. Championship Tournament 30/30 Cloth in Euro Blue. Full pocket wrap on sides and corners
http://forums.azbilliards.com/album.php?albumid=1481
Thanks for Looking!
Trent from Toledo (419)740-0133
Installing a Brunswick Anniversary restoration of ours next Friday in Bridgeport, New Jersey!
Todays installation was for very cool guy named Craig. He bought a pair of Brunswick Sport Kings and we installed one for him today. Championship Tournament 30/30 Cloth in Euro Blue. Full pocket wrap on sides and corners
http://forums.azbilliards.com/album.php?albumid=1481
Thanks for Looking!
Trent from Toledo (419)740-0133
Installing a Brunswick Anniversary restoration of ours next Friday in Bridgeport, New Jersey!
Brunswick Anniversary Pool Table!!!
New Jersey!!! Great client I love these old Brunswicks!
Gold Crown 4 is in the works and will be installed in a week or so. Thanks for looking.
Trent from Toledo
UPDATE*** I changed the pictures and also: I have just recently acquired my 1st Brunswick CENTENNIAL!!!! 9 Foot, w/ ball return. LOTS OF ALUMINUM TO POLISH OUT!
http://forums.azbilliards.com/album.php?albumid=1481
New Jersey!!! Great client
I love these old Brunswicks!Gold Crown 4 is in the works and will be installed in a week or so. Thanks for looking.
Trent from Toledo
UPDATE*** I changed the pictures and also: I have just recently acquired my 1st Brunswick CENTENNIAL!!!! 9 Foot, w/ ball return. LOTS OF ALUMINUM TO POLISH OUT!
http://forums.azbilliards.com/album.php?albumid=1481
Last edited:
My best custom Gold Crown IV to date.
What a Long day! Gold Crown IV oversized 8 in Ravenna, Ohio! This is my best custom table to date. Gold Veined Powder coating on all metal, ball return, new gulley pockets, Championship 30/30 Tour Edition Cloth, New Brunswick SuperSpeed cushions, Reveneered rails in Maple w/ new round mother of pearl sights, re-veneered leg stretcher in Maple & also the fronts and backs of the legs, Gunstock Minwax stain and clear satin poly.
Rails were cut @ 141 degrees in the corners, 100 on the sides and 1/4" neoprene pocket facings. Another VERY satisfied customer. 15 Gold crowns and 3 Anniversary's in 13 months.
Ft. Wayne, Indiana is up next: 9' Brunswick Anniversary Model D-C in a couple weeks! Thanks for looking at my work!
Trent from Toledo (419)740-0133
Link to My photo Album:
http://forums.azbilliards.com/album.php?albumid=1481
What a Long day! Gold Crown IV oversized 8 in Ravenna, Ohio! This is my best custom table to date. Gold Veined Powder coating on all metal, ball return, new gulley pockets, Championship 30/30 Tour Edition Cloth, New Brunswick SuperSpeed cushions, Reveneered rails in Maple w/ new round mother of pearl sights, re-veneered leg stretcher in Maple & also the fronts and backs of the legs, Gunstock Minwax stain and clear satin poly.
Rails were cut @ 141 degrees in the corners, 100 on the sides and 1/4" neoprene pocket facings. Another VERY satisfied customer. 15 Gold crowns and 3 Anniversary's in 13 months.
Ft. Wayne, Indiana is up next: 9' Brunswick Anniversary Model D-C in a couple weeks! Thanks for looking at my work!
Trent from Toledo (419)740-0133
Link to My photo Album:
http://forums.azbilliards.com/album.php?albumid=1481
Indianapolis, Indiana. Brunswick Anniversary Model D-C
Just home from Indianapolis, Indiana. Brunswick Anniversary Model D-C.
Starting my first Centennial Restore this coming week!! Thanks for looking at my photo's!
http://forums.azbilliards.com/album.php?albumid=1481
Trent from Toledo (419)740-0133
Just home from Indianapolis, Indiana. Brunswick Anniversary Model D-C.
Starting my first Centennial Restore this coming week!! Thanks for looking at my photo's!
http://forums.azbilliards.com/album.php?albumid=1481
Trent from Toledo (419)740-0133