Cuesmith Deluxe with upgrades and extrassee
- Thread starter takeitdown
- Start date
takeitdown
Banned
takeitdown
Banned
Bump
Very clean setup, saving a bunch over retail here. Everything in perfect working order.
Very clean setup, saving a bunch over retail here. Everything in perfect working order.
Last edited:
takeitdown
Banned
Nice setup with extras. Everything is in perfect working order.
Last edited:
takeitdown
Banned
I can ship anywhere in US at you expense
Last edited:
takeitdown
Banned
Cuesmith Deluxe with upgrades and extras
Cuesmith Deluxe in excellent working order. Has 60 inch hard anodized bed, large 1.4" bore headstock and adjustable taper bars for shafts and butts Comes with all standard equipment in the deluxe standard package.
-Foot pedal and belt for wrap motor
-Spring loaded tool carriage with 1 7/8" wide roller bearing on Mount shaft for running on taper bars
- Router, heavy duty mount to attach to carriage, variable speed bidirectional power feed and straight cut for tapering.
- Lever action drilling tailstock with 1/2" keyed chuck
- Large steady rest with 10 collet set 1.3"-0.75". Includes shaft joint and butt joint collets.
- Small steady rest for shafts with 3 collets 12.5/13.1/13.9mm. It is easy to make more yourself and good practice.
-3/8-10 and 5/16-14 maintenance pins for spinning threaded shafts
-Concave live center, 60 degree live center and 60 degree dead center
- 5 quarter inch cutting bits 2 right or left hand cut, cutoff blade , round nose and 45 degree.
$2250 for the lathe alone with everything the deluxe package comes with.
$200 for 5 taps 3/8-10, radial pin, 5/16-18, 5/16-14 and 7/16-14 for shaft inserts /large butt boring bar/ weight bolt tap/ point cutting 1/4" shank router bit/ 3 blade cutoff blade. $200 for all this is a great deal.
$100 2 birdseye maple forearms/gaboon ebony buttsleeve and pionts/many assorted veneer.
The entire package deal will be less than the combined total of $2550
Pickup in Syracuse, NY preferred.
I will ship if payment is made in full plus shipping costs by Paypal gift or cashier's check. I can pack it so it arrives safely. Will ship in continental US request. PM with cell number if you want to contact me to discuss.
Cuesmith Deluxe in excellent working order. Has 60 inch hard anodized bed, large 1.4" bore headstock and adjustable taper bars for shafts and butts Comes with all standard equipment in the deluxe standard package.
-Foot pedal and belt for wrap motor
-Spring loaded tool carriage with 1 7/8" wide roller bearing on Mount shaft for running on taper bars
- Router, heavy duty mount to attach to carriage, variable speed bidirectional power feed and straight cut for tapering.
- Lever action drilling tailstock with 1/2" keyed chuck
- Large steady rest with 10 collet set 1.3"-0.75". Includes shaft joint and butt joint collets.
- Small steady rest for shafts with 3 collets 12.5/13.1/13.9mm. It is easy to make more yourself and good practice.
-3/8-10 and 5/16-14 maintenance pins for spinning threaded shafts
-Concave live center, 60 degree live center and 60 degree dead center
- 5 quarter inch cutting bits 2 right or left hand cut, cutoff blade , round nose and 45 degree.
$2250 for the lathe alone with everything the deluxe package comes with.
$200 for 5 taps 3/8-10, radial pin, 5/16-18, 5/16-14 and 7/16-14 for shaft inserts /large butt boring bar/ weight bolt tap/ point cutting 1/4" shank router bit/ 3 blade cutoff blade. $200 for all this is a great deal.
$100 2 birdseye maple forearms/gaboon ebony buttsleeve and pionts/many assorted veneer.
The entire package deal will be less than the combined total of $2550
Pickup in Syracuse, NY preferred.
I will ship if payment is made in full plus shipping costs by Paypal gift or cashier's check. I can pack it so it arrives safely. Will ship in continental US request. PM with cell number if you want to contact me to discuss.
Last edited:
takeitdown
Banned
Cuesmith Deluxe with upgrades and extras
Cuesmith Deluxe in excellent working order. Has 60 inch hard anodized bed, large 1.4" bore headstock and adjustable taper bars for shafts and butts Comes with all standard equipment in the deluxe standard package.
-Foot pedal and belt for wrap motor
-Spring loaded tool carriage with 1 7/8" wide roller bearing on Mount shaft for running on taper bars
- Router, heavy duty mount to attach to carriage, variable speed bidirectional power feed and straight cut for tapering.
- Lever action drilling tailstock with 1/2" keyed chuck
- Large steady rest with 10 collet set 1.3"-0.75". Includes shaft joint and butt joint collets.
- Small steady rest for shafts with 3 collets 12.5/13.1/13.9mm. It is easy to make more yourself and good practice.
-3/8-10 and 5/16-14 maintenance pins for spinning threaded shafts
-Concave live center, 60 degree live center and 60 degree dead center
- 5 quarter inch cutting bits 2 right or left hand cut, cutoff blade , round nose and 45 degree.
$2250 for the lathe alone with everything the deluxe package comes with.
$200 for 5 taps 3/8-10, radial pin, 5/16-18, 5/16-14 and 7/16-14 for shaft inserts /large butt boring bar/ weight bolt tap/ point cutting 1/4" shank router bit/ 3 blade cutoff blade. $200 for all this is a great deal.
$100 2 birdseye maple forearms/gaboon ebony buttsleeve and pionts/many assorted veneer.
The entire package deal will be less than the combined total of $2550, I will sell it all for $2400¤which is stealing!
Pickup in Syracuse, NY preferred.
I will ship if payment is made in full plus shipping costs. I will charge $150 for shipping and refund any excess payment.
Will ship in continental US only. PM with cell number if you want to contact me to discuss.
Cuesmith Deluxe in excellent working order. Has 60 inch hard anodized bed, large 1.4" bore headstock and adjustable taper bars for shafts and butts Comes with all standard equipment in the deluxe standard package.
-Foot pedal and belt for wrap motor
-Spring loaded tool carriage with 1 7/8" wide roller bearing on Mount shaft for running on taper bars
- Router, heavy duty mount to attach to carriage, variable speed bidirectional power feed and straight cut for tapering.
- Lever action drilling tailstock with 1/2" keyed chuck
- Large steady rest with 10 collet set 1.3"-0.75". Includes shaft joint and butt joint collets.
- Small steady rest for shafts with 3 collets 12.5/13.1/13.9mm. It is easy to make more yourself and good practice.
-3/8-10 and 5/16-14 maintenance pins for spinning threaded shafts
-Concave live center, 60 degree live center and 60 degree dead center
- 5 quarter inch cutting bits 2 right or left hand cut, cutoff blade , round nose and 45 degree.
$2250 for the lathe alone with everything the deluxe package comes with.
$200 for 5 taps 3/8-10, radial pin, 5/16-18, 5/16-14 and 7/16-14 for shaft inserts /large butt boring bar/ weight bolt tap/ point cutting 1/4" shank router bit/ 3 blade cutoff blade. $200 for all this is a great deal.
$100 2 birdseye maple forearms/gaboon ebony buttsleeve and pionts/many assorted veneer.
The entire package deal will be less than the combined total of $2550, I will sell it all for $2400¤which is stealing!
Pickup in Syracuse, NY preferred.
I will ship if payment is made in full plus shipping costs. I will charge $150 for shipping and refund any excess payment.
Will ship in continental US only. PM with cell number if you want to contact me to discuss.
Last edited:
takeitdown
Banned
Price drop on lathe package.
Hey
Text my ass maybe we can work something out after I buy the house ! But you have to come visit me this time.
Text my ass maybe we can work something out after I buy the house ! But you have to come visit me this time.
takeitdown
Banned
Sold sold sold
Last edited: