...to make a tap, from a joint pin?
j2pac Marital Slow Learner. Staff member Moderator Gold Member Silver Member Nov 11, 2019 #1 ...to make a tap, from a joint pin?
P pip9ball AzB Silver Member Silver Member Nov 11, 2019 #2 Yes, it is possible, however it won't cut the threads as good as a tap. There are a few guys on here who make the mezz wavy tap from a pin. It gets the job done but the clearance isn't as tight as a real tap. Sent from my Pixel 4 XL using Tapatalk
Yes, it is possible, however it won't cut the threads as good as a tap. There are a few guys on here who make the mezz wavy tap from a pin. It gets the job done but the clearance isn't as tight as a real tap. Sent from my Pixel 4 XL using Tapatalk
Kim Bye AzB Silver Member Silver Member Nov 12, 2019 #3 Yes you can. Not sure if I would call it a permanent solution, but it will work if you need to thread a few shafts.
Yes you can. Not sure if I would call it a permanent solution, but it will work if you need to thread a few shafts.
Michael Webb AzB Silver Member Silver Member Nov 12, 2019 #4 j2pac said: ...to make a tap, from a joint pin? Click to expand... Anything is possible. :grin-square:
j2pac said: ...to make a tap, from a joint pin? Click to expand... Anything is possible. :grin-square:
Newsheriffintwn Newsheriff Custom Cues Gold Member Silver Member Nov 12, 2019 #5 j2pac said: ...to make a tap, from a joint pin? Click to expand... I've made several Wavy taps from pins. Here's also a pic of the threads it cut in ebony with a wavy pin for reference.
j2pac said: ...to make a tap, from a joint pin? Click to expand... I've made several Wavy taps from pins. Here's also a pic of the threads it cut in ebony with a wavy pin for reference.
j2pac Marital Slow Learner. Staff member Moderator Gold Member Silver Member Nov 12, 2019 #6 Thank you gents. Much appreciated. :thumbup: Last edited: Nov 12, 2019
