Delta 13 insert template?

icemanfred · Jul 1, 2018

Hi
I just ordered a delta 13 select.
I thought I would try my hand at making the insert and was wondering if anyone had a template

GoldCrown · Jul 1, 2018

.......................

icemanfred · Jul 1, 2018

that would be great.
I have a new belt in mind to try with.

GoldCrown · Jul 1, 2018

Hi. The inserts are attached with the tape I can’t remove them. However the width is simple. I’ll give you the width and extreme length. I can make round corner templates. However you will most likely have the Triangle first.

jtompilot · Jul 1, 2018

icemanfred said:
Hi
I just ordered a delta 13 select.
I thought I would try my hand at making the insert and was wondering if anyone had a template

Several months ago I ordered the inserts. Two sides I had engraved, and the other side says Delta. Those inserts make a huge difference

GoldCrown · Jul 1, 2018

jtompilot said:
Several months ago I ordered the inserts. Two sides I had engraved, and the other side says Delta. Those inserts make a huge difference

They look good also. As for a DIY inserts that would be creative and original but the factory inserts are sharp.

Bavafongoul · Jul 1, 2018

Jtompilot......where'd you order the inserts?

I need set for a for a Blue Delta Elite Rack.
The engraving has to read "Blue Fin Billiards".

TX

Matt B.

GoldCrown · Jul 1, 2018

Bavafongoul said:
Jtompilot......where'd you order the inserts?

I need set for a for a Blue Delta Elite Rack.
The engraving has to read "Blue Fin Billiards".

TX

Matt B.

I got mine from Seybert’s ( years ago)
EDIT: They show on their website at $24.95. Custom engraving optional.

RiverCity · Jul 1, 2018

Cut three 1" wide strips, 9 5/8" long, and put a 1" radius on each end.

No real need for a template, but you can transfer those measurements onto 1/4" graph paper if it helps, and you are good to go. :thumbup:

jtompilot · Jul 2, 2018

Bavafongoul said:
Jtompilot......where'd you order the inserts?

I need set for a for a Blue Delta Elite Rack.
The engraving has to read "Blue Fin Billiards".

TX

Matt B.

Manning Cues. Turns out it was almost a year ago.

icemanfred · Jul 2, 2018

https://forums.azbilliards.com/album.php?albumid=2455&pictureid=18436

3d printed insert based on chuck fields measurements,

I will test fit and reprinted with either larger font on a bolder font.

dont think the plastic will have the same effect as the leather but maybe the thick foam double sided tape will help.
if not there is always a leather belt

MrSharp · Jul 2, 2018

I have the actual Delta inserts also, was too lazy to make a set and wanted the light tan leather as I dyed mine red and then sealed them with low gloss, they are on a black rack and look pretty good.

GoldCrown · Jul 2, 2018

MrSharp said:
I have the actual Delta inserts also, was too lazy to make a set and wanted the light tan leather as I dyed mine red and then sealed them with low gloss, they are on a black rack and look pretty good.

Pictures please.

GoldCrown · Jul 2, 2018

icemanfred said:
https://forums.azbilliards.com/album.php?albumid=2455&pictureid=18436

3d printed insert based on chuck fields measurements,

I will test fit and reprinted with either larger font on a bolder font.

dont think the plastic will have the same effect as the leather but maybe the thick foam double sided tape will help.
if not there is always a leather belt

Looks great. Nicely done and very COOL. That’s why you’re the iceman

MrSharp · Jul 2, 2018

GoldCrown said:
Pictures please.

Hope my resize app worked and picture doesn’t turn out huge, anyway here is a quick picture.

MrSharp · Jul 2, 2018

icemanfred said:
https://forums.azbilliards.com/album.php?albumid=2455&pictureid=18436

3d printed insert based on chuck fields measurements,

I will test fit and reprinted with either larger font on a bolder font.

dont think the plastic will have the same effect as the leather but maybe the thick foam double sided tape will help.
if not there is always a leather belt

That looks real good, if it works I’m sure you sell those.

ipoppa33 · Jul 2, 2018

My diy inserts

Here is two pairs I did. One is ringtail lizard and the other is carbon fiber.

K2Kraze · Jul 2, 2018

Nice work, ipoppa33!

~ K.

icemanfred · Jul 2, 2018

I like the carbon fiber. How well did it deaden the sound

icemanfred · Jul 2, 2018

,.........double post

Delta 13 insert template?

AzB Silver Member

AzB Gold Member

AzB Silver Member

AzB Gold Member

AzB Silver Member

AzB Gold Member

AzB Silver Member

AzB Gold Member

AzB Silver Member

AzB Silver Member

AzB Silver Member

Registered

AzB Gold Member

AzB Gold Member

Registered

Attachments

Registered

Shakedown Custom Rods

AzB Silver Member

AzB Silver Member

AzB Silver Member