T Slot Cutter

Rybord

AzB Silver Member
Silver Member
I've been trying to find a small T Slot cutter that would cut slots in delrin close to the same size as those in the crossfeed in the Deluxe Cuesmith or Taig lathe. The width of the slot is .400 with a .200 shank. Any help is much appreciated!!!!!

Thanks, Ray
 

RocketQ

It's Not Rocket Science
Silver Member
Find one with a .100 cut depth and make 2 passes moving over to cue the opposite side. If all you are cutting is Delrin why not use a key hole router bit.
 

Rybord

AzB Silver Member
Silver Member
Router Bit

Find one with a .100 cut depth and make 2 passes moving over to cue the opposite side. If all you are cutting is Delrin why not use a key hole router bit.

Thanks John, I got a key hole router bit and it will work perfectly for what I'm doing. I'm not that familiar with the router bits. I thought I'd be able to find a milling cutter.

Thanks, Ray
 

RocketQ

It's Not Rocket Science
Silver Member
Most of the mills are made for .250 and larger bolts. PM me with what you are doing and I may be able to give you some other ideas.
 
Top