Been busy but got a little time to put some of these back up and some new ones.
Josswest 1974/75 ivory joint, ferrules and Hoppe ring...pretty cool history with this cue.
Butt - 15.9 ounce 29.5 inches 3/8x10 flat faced / cortland wrap
Shaft - 3.85 ounce 12.3 mm 29.5inch
Gus Shaft - 3.8 ounce 13.5 mm 29.5 inch
Gus Shaft - 3.8 ounce 12.7 mm 29 inch
NFS at the moment
Ariel Carmeli made in 2008. There is no makers mark on the cue but I spoke to Ariel and he confirmed the cue and when he made it and that can be sent to the buyer. This is a really sweet playing cue.
Butt - 16.5 ounce / no weight bolt and the butt could be lightened up if someone so desired
Shaft - 4 ounce 13 mm
Shaft - 3.9 ounce 12.9 mm
$1250
Joss
Joss 1971/72
Butt - 15.8 ounce 28.5 inches
Original Shaft - 13 mm 3.9 ounce 28.5 inches
Newer shaft made by Dan - 12.9 mm 3.45 ounce 29 inches
$1300
Dan Tull made in 2012
Butt - 15 ounce / 3/8x11 pin 30 inch
Shaft - 3.7 ounce 12.85 mm 30 inch
$795
Mezz Dual Force jump / break
Butt - 14.95 ounce
Shaft - 4.2 ounce 13 mm
$475
Mike Stacey dated 99 / has a roll which I’m almost certain is the handle. Nothing that would be noticeable when playing. Mike makes far less 5/16x14 steel joint cues than his others.
Butt - 15.3 ounce
Shaft - 3.9 ounce 12.9 mm
$395
Meucci / new cue
Butt - 14.5 ounce
Shaft - 3.6 ounce 12.45 mm 30 inch carbon pro
$595
Samsara Bar Cue butt / unhit Predator V shaft
Butt - 14.25 ounce
Shaft - 4 ounce 13 mm
$495
Douglas sneaky pete
Butt - 14.9 ounce
Shaft - 3.9 ounce 13 mm
Vigus shaft - 3.25 ounce 11.8 mm
SOLD
Sneaky pete made locally from a bar cue. Cue is signed BT and I believe ‘19 or ‘18 and it has a 5/16x14 pin. The shafts on the old Joss fit really well at the joint.
Butt - 14.5 ounce
Shaft - 3.48 ounce 12.6 mm
SOLD
Predator Air
SOLD
Trying to keep 10 threads off the first page so if anyone wants more pics ill be happy to send them.
...
...
