3/8-10 thread die

Dave38

theemperorhasnoclotheson
Silver Member
where does one get a 3/8x10 thread die? I haven't seen one, only the taps
Dave
 

ROB.M

:)
Silver Member
Post

Some ppl can cut really nice threads with taps/dies...some ppl can't...
Most wood is tricky to cut with taps/die because of the wood fibers.

Cut some HDPE or delrin with the tap or die, if your getting the long pretty shiny curlys that's a good sign, as your tool dulls/wear you'll be able to view the curlys and take notes of a dull tool. If your not getting a pretty curly you've either dulled the tool or not cutting within the tools parameters .

What works for one person might not work out for the next... A lot of factors come into play when working with machine tools and hand manipulating the tooling.


Rob.M
 
Last edited:

Busbee Cue

AzB Silver Member
Silver Member
-

Send link...I think you might have the wrong one...



Rob.M

I bought the die from your ebay link and it is not split.
I wish I had looked at the listing a bit closer to notice.
It was my mistake so I did not complain.
 
Top