The 2 gold ones are original condition, and I just completed a restore on the blue ones. Stain, paint, and new masonite backer. The last one had a plastic nameplate which was missing.
Thanks,
Ian
Thanks,
Ian
Thanks Guys.
I need to replace the rubber tabs on one of them. I just ordered a 10ft roll of rubber 1/4" rod. I am going to try it as an alternative to the original tabs. Hoping the rubber is a little softer.
Thanks,
Ian
the rubber rod should work well but if not, when I couldn't find the original "nibs" it was suggested to me to get black rubber O-rings in the right diameter and sure enough, those worked great. Didn't matter that they were circular, once in place and the set screw tightened they straightened out very nicely. A very inexpensive fix. :thumbup:
Thanks for the tip. I first checked for o rings based on your previous thread. Home depot only had smaller ones. Once I got on Amazon, I found a 10ft roll of rubber for 12$!
https://www.amazon.com/gp/product/B075X3G74X/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1