leveling legs for a gold crown

bbb · Apr 25, 2020

i have a gold crown 1 that needs leveling
i would like to replace the legs
and get the kind that can be leveled
is this a good idea?
what should it cost me to buy them?
what should it cost to install them and level the table?
any recomendations for a mechanic near vero beach fl
2 hours from orrlando
3 hours from jacksonville
45 minutes from melbourne
almost 3 hours from miami
3 hours from tampa

rexus31 · Apr 25, 2020

bbb said:
i have a gold crown 1 that needs leveling
i would like to replace the legs
and get the kind that can be leveled
is this a good idea?
what should it cost me to buy them?
what should it cost to install them and level the table?
any recomendations for a mechanic near vero beach fl
2 hours from orrlando
3 hours from jacksonville
45 minutes from melbourne
almost 3 hours from miami
3 hours from tampa

Call Ken at Classic Billiards.

https://www.classicbilliards.net

You may need a large drill press and Forstner Bit to hollow out your pedestals so you can mount the nut plate.

Parts needed:

(4) Nut Plates
(8) Wood Screws to mount the Nut Plates
(4) 3/4-16 studs
(4) 3/4-16 nuts
(4) Adjustable Feet.

bbb · Apr 26, 2020

rexus31 said:
Call Ken at Classic Billiards.

https://www.classicbilliards.net

You may need a large drill press and Forstner Bit to hollow out your pedestals so you can mount the nut plate.

Parts needed:

(4) Nut Plates
(8) Wood Screws to mount the Nut Plates
(4) 3/4-16 studs
(4) 3/4-16 nuts
(4) Adjustable Feet.

thanks for the help
I appreciate it
:thumbup:

jtompilot · Apr 26, 2020

bbb said:
thanks for the help
I appreciate it
:thumbup:

While your at it, get the bearing plates that fit the adjustable legs. My GC4 had them. It makes twisting the leg easy.

bbb · Apr 26, 2020

jtompilot said:
While your at it, get the bearing plates that fit the adjustable legs. My GC4 had them. It makes twisting the leg easy.

thanks for the reply
:thumbup:

juspooln · Apr 29, 2020

bbb said:
i have a gold crown 1 that needs leveling
i would like to replace the legs
and get the kind that can be leveled
is this a good idea?
what should it cost me to buy them?
what should it cost to install them and level the table?
any recomendations for a mechanic near vero beach fl
2 hours from orrlando
3 hours from jacksonville
45 minutes from melbourne
almost 3 hours from miami
3 hours from tampa

If you have not found anyone to help you yet and would like a quote, you can call our store at 904-733-6880 and we can work you up a quote.

bbb · Apr 30, 2020

......thanks

The ProRailbird · May 1, 2020

If you decide not to convert to adjustable feet, but don't want the feet on a pile of unsightly shims, you can set up the frame where you want the table, with all the feet on the floor, then shim on top of the pedestal between it and the frame. Use flat shims, not wedges.

As Rexus said, Ken at Classic Billiards has that stuff.

If your original feet are in good condition and you want to save some cash, they can be drilled & tapped.

leveling legs for a gold crown

bbb

AzB Gold Member

rexus31

AzB Silver Member

bbb

AzB Gold Member

jtompilot

AzB Silver Member

bbb

AzB Gold Member

juspooln

AzB Silver Member

bbb

AzB Gold Member

The ProRailbird

AzB Silver Member