Add wgt to Dufferin
- Thread starter jed1894
- Start date
Donald A. Purdy said:There is usually a small round removable piece in the middle of the bumper that when removed exposes the screw to remove the bumper. I have 5 Dufferins and they are all the same.
Purdman
Is there a weight screw in there once you get it off? I always assumed my Duffering Phantoms were a solid butt with no weight bolt.
Donald A. Purdy said:There is usually a small round removable piece in the middle of the bumper that when removed exposes the screw to remove the bumper. I have 5 Dufferins and they are all the same.
Purdman
I'll check that tonight....if the small piece is there, can you add wgt? If so, how?
The cue I have (Dufferin Phantom) does not have a smaller rubber piece on the larger bumper. The rubber bumper looks glued on. I guess I could use a razor blade and break the seal, but I wanted to make sure I knew what was under there (or inside there) before I did that.
Does anyone know if wgt can be added after the bumper is removed?
thanks, JED
Does anyone know if wgt can be added after the bumper is removed?
thanks, JED
jed1894 said:
I have several Phantoms (they were the standard cue I bought for my kids), maybe if I'm feeling reckless, I'll pop one of those suckers off and see what's inside this weekend.
5-21-5 I just popped the bumper one of my Dufferin Phantom. The bumper is only glued on, but you'll be disappointed with what I saw inside. There is no weight bolt only a small hole about an inch deep drilled for the bumper to be glued in. Better luck next time.
Last edited: