Andy Gilbert 6 pts 5 veneers tulipwood into Ebony Forearm!! $1250 Shipped

Cuemaster98

Cuemaster98

AzB Gold Member
Gold Member
Silver Member
Hi Guys,

Just pick this one up and it's a monster player: Asking $1250 shipped..no trade please on this one.

This is a really nice 6 pts 5 veneers ebony custom cue from Andy Gilbert made in 2005. The points are tulipwood into a dark jet black ebony. The cue play solid and weight in at 15.1 oz with the 1 shaft at 3.6 oz and the other shaft at 3.8 oz. The tips are 12.7 and 12. 75mm respectively. The cue has an 3/8-10 joint with a black phenolic collar. The butt is perfectly straight and the condition is excellent with a few minor finish bruise. 1 shaft is perfect, the other has a slight roll. The cue also has a real lizard wrap. I will also clean both shafts and install new Molavia on them.


154883875_o.jpg

154883887_o.jpg

154883891_o.jpg

154883855_o.jpg

154883842_o.jpg

154883828_o.jpg
 
Last edited:
Isn't this cue 60 inches long? If this isn't the one it is identical to one that I saw just a short while ago.
 
Ktown D said:
Isn't this cue 60 inches long? If this isn't the one it is identical to one that I saw just a short while ago.
Click to expand...

I don't think so...look like standard like to me. The gentleman that trade this cue to me had it in his locker for 3 years. I saw another selling on here as well but this is not it. Anyway, market it tight and I need money to acquire another high end cue so will consider cash trade deal depending on what you have.

REgards,
Duc.
 
Hiya Duc, beautiful cue!!! I really like the 6 all high points.

If the shafts were 13mm I would seriously consider it. If it were 13mm and 59" I would take it.

Good luck with the sale my friend!!
 
Thanks Cory,

The gilbert is now in the raffle section...the market is tight and I think there will be enough interest for this cue at $32.00 a spot. It's a solid player as you would expect from Andy. Cue is still available for sales but once raffle kick out successfully then it won't be available.

Good Luck everyone.

Regards,
Duc.

CoryC said:
Hiya Duc, beautiful cue!!! I really like the 6 all high points.

If the shafts were 13mm I would seriously consider it. If it were 13mm and 59" I would take it.

Good luck with the sale my friend!!
Click to expand...
 
Raffle Cancelled for Gilbert!!

Raffle cancelled for Gilbert so the cue is available for sales again:( :) so here you chance to pic up this nice ebony gilbert. I've already installed new Molavia tips on these shafts. Also clean and seal one shaft....almost done with the other. Will post new pics shortly. Cash and trade deal welcome!!

Regards,
Duc.
 
161508040_o.jpg


Here a pic of the cue next to a schon cue. I can measure length of butt and shafts tonight but it's look standard to me at 29" with the shaft it should be 58" long. Let me know how you want to pay :)

Regards,
Duc.

ersatzplayer said:
I really like it! Could you please confirm the length of the cue? I can't bank on "looks standard" ;-)
Click to expand...
 
That's an easy one...you can order a shaft directly from Andy for it to be 1" longer...using 30" instead of 29" then you have a 59" cue. The cue is actually 58.50 from tips to bumper. Butt is 29" with bumper is 29.25" and both shafts are 29.25".

Regards,
Duc.

ersatzplayer said:
- Sorry. I was looking for 59" minimum. So if it is really 58" it's not for me...
Good luck with the sale, it really is beauty!
Click to expand...
 
Last edited:
You must log in or register to reply here.
Back
Top