Cue Shop For Sale

bruppert

<Insert witty comment>
Silver Member
Cue Shop For Sale - SOLD

Cueshop has been SOLD

Everything you need to get up and running.

I hate to sell this as it was fun to do but there are many other things I enjoy doing as well. I really enjoyed talking to all the people on AZ along with all the great people I've met over the years.

I will respond to this with a list of items. The Value (meaning what I paid) is somewhere between $25,000 - $30,000. Since most things have gone up in the last couple years and I bought pretty much everything as cheaply as possible, its probably closer to $30k


Highlights
Complete Deluxe Hightower lathe with pretty much all the attachments
Jet Deluxe Pro Bandsaw (I'd actually like to keep this, we can discuss)
Jet 2 micron Dust collection system
Vacuum Chamber
Tool grinder
Tons of pins, inserts, collets
2 extra Scroll Chucks for the lathe
Epoxies, glues, finishes, stains, etc...
Shaft blanks (some are 30+ gpi), shafts in diff stages of completion, Shaft Cart, Lam blanks
Forearms, Handles, Coring dowels (Hard maple, Purepleheart and Lams)
Way too many different exotic blanks to list
Calipers, Micrometers, indicators, digital speed and moisture meters,
All the tools that came with the equipment.
Craftsman 150 PSI, 33 Gallon Air Compressor
Tons of drills, cutters, lathe bits, Carbide Gun Drills, Taps
A lot of ferrules, Tips. bumpers, etc....
Hightower's book and a tons of other stuff on building cues

Pretty much everything on this list (see response below) is included.
Note everything is on the list
Not everything in the pictures is included, some are personal tools, and other personal things. Everything cue related is included!!






















FYI, this is being sold all together. I am not selling anything individually.

Please contact me if you are seriously interested. Looking for someone who can pick this up in Baltimore. I really really prefer not to ship.

For additional info please EMAIL me at:
ou81forme at yahoo dot com


Again, I am NOT selling individual items.
Trades? There isn't much I need. If you can build me a garage or have a nice truck it might be worth discussing.


$16,000 (Reduced)
 
Last edited:

bruppert

<Insert witty comment>
Silver Member
Items Included with Sale 1 of 2

I know its hard to tell what is all there. I have really maximized the usage of the limited space I had for the shop.
I removed about $350 of unrelated stuff and dropped the price $2,000. This was stuff that

Cue Stuff Included in Sale Qty

#6 Center Drills - 5
3/4" Router bit - 1/4" shank - 2
4 Carbide Drills 5/16 & 3/8, 7.8mm HSS & 5/16 End Mill - 4
6 wing Cutter - 2
6 Wing Cutters & Arbors - 2
90 degree pointed cutter - 1
90 degree Side cutter - 1
Alignment Fixture - Joey - 1
Angle Brakets (2) and Box of Hooks (2) - 1
Atlas Wax, Slick, Cleaner, Burnisher, etc - 1
Bandsaw - Jet, Deluxe Pro - 1
Bandsaw Blade - Timber Wolf 1/2" x 6 - 1
Bandsaw Blade - Timber Wolf 1/4" x 2-3 - 1
Bar Cues - 12
Bearings & Brush for PC 7310 - 1
Blanks - Merry Widow Blanks - 6
Blanks - Purpleheart & Birdseye Sneaky Pete Blank - 1
Blanks - Zebrawood - Tapered Rounds 28" - 19
Book - Collection of Notes, Posts, etc.. -
Book - The Pool Cue Book - 1
Books - Hightower, Cue Building -
Boring Bar - Carbide 1/4 sh 1.5" length - 1
Bubble Mailers 4"x8" - 25
Bumper .250 - 10
Bumpers - #1 - 10
Bumpers - 15/16 Dia - 10
Bumpers - Brown - 10
Bumpers Threaded - 20
Buttsleeve - Custom Buttsleeves - BE Maple - 8
Carbide Lathe Bit 1/4" right - 1
Carbide Lathe bits 1/2" righ, 15 degree and box - 3
Carbide Slitting Saws - 5
Center Drill #4 - 3
Center Drill #4 - 2
Chalk - Gold - 12
Chalk 1 box of 12 - 1
Clear Plastic Tubes 1 x 14" - 20
Co-Ax Indicator - 1
Collets, Shaft - Complete set from Atlas, still in bags - 1
Contact Cement - Tigerbond - 1
Coring Dowels, Maple 1.25 x 16 - 28
Coring Drill - .774 (Gun Drill) - 1
Coring Drill .3125 (Gun Drill) - 1
Coring Drill .650 (Gun Drill) - 1
Cue Sleeves - 25
Cue Wax - 1
Cut-Off Blade - 1
Cut-Off Tool Holder - 1
Cyano - Insta-Set - 1
Cyano - Tough Tip - 1
Cyano Med - 1
Cyano Thick - 1
Cyano Thin - 3
Cyno Gel, Loctite - 3
Danish Oil - 1
Delrin Gib for Lathe - 1
Delrin Rod - 1
Delrin Rods 1.250" x 12" - 12
Dipping Tank & Resolute - 1
Double Black Linen Tube - 1
Double Black Linen Tube - Joint 1' - 1
Dril Bits, Large. Mt2, fits deep drilling tailstock - 1
Drill Bits - 170+ in carry case - 1
Drill Chuck & Tailstock Mandrel for Hightower Deluxe - 1
Drills - Brite HSS - 17
Drills, Taps, Thread fixer - 1
Dust Collection - Quick Disconnect - 2
Dust Collection Hose - 1
Dust Collection Hose 10' - 1
Dust Collection set - Woodcraft - 1
Dust Collector - Table Top - 1
Dust Collector 2 Micron - 1
Dust Collector Hose Clamps - Squeezable - 1
Dust Collector, Universal Adapter - 1
Dust Collector, X-Treme Tape - 1
Dye, Transtint - Amber - 1
Dye, Transtint - Black - 1
Dye, Transtint - Dark Wlanut - 1
Dye, Transtint - Red Mahogany - 1
Ear Plugs - Foam - 10
Elforyn Block .67 x 1.45 x 12" - 1
Elk Antlers (Large) - 2
End Mill - 2fl Carbide 1/16 - 2
End Mill - 2fl Carbide 1/8 - 4
End Mill - 2fl Carbide 3/32 - 2
Epoxy - Raka - Pigment 1-White, 1-Black - 2
Epoxy -Devcon 30-Min (2-ton) Epoxy - 1
Epoxy -Devcon 5-Min Epoxy - 1
Epoxy -G5 Pint - 1
Epoxy -Max Clear Epoxy 64 Ounce - 1
Epoxy -Raka - 3qts. UV - 1
Epoxy -West 105A Resin - 1
Epoxy -West 205A Hardener - 1
Epoxy -West 206A Slow Hardener - 1
Epoxy -West System - Pump Set - 1
Epoxy -West System 207 Clear Hardener - 1
Epoxy -West System Pumps - 1
Ferrukle - Drilled and tapped Ivorite 5/16x18 - 3
Ferrule - ABS - 3
Ferrule - Ivorite/Melamine ferrules - 3
Ferrules - Aegis - 10
Ferrules - Aegis drilled and tapped - 3
Ferrules - Aegis solid ferrules - 3
Ferrules - Black fiber pads 14MM - 5
Ferrules - Ivorite-III - 20
Ferrules - Ivor-X - 29
Ferrules - Juma - 5
Ferrules - Juma drilled and tapped - 3
Ferrules - Juma solid ferrules - 3
Ferrules - Melamine (GRICE) - 20
Ferrules - OB Carbon pads - 1
Ferrules - OB classic ferrules - 1
Ferrules - OB ferrules - 1
Ferrules Aegis - 10
Ferrules Ivorite 3 - 20
Ferrules Ivory - 4
Ferrules XTC - 10
Fiber Rings - 25 .625 x 1.000 x .030 - 1
Fiber Rings - 25 .750 x 1.375 x .030 - 1
Finish - Ceramithane qt. - 1
Finish - Ceramithane qt. - 1
Finish - GF Enduro-VAR Glass - 1
Finish - GF Top Coat - High Perf Gloss - 1
Finish - Hydrocote qt. - 1
Finish - Shellac - 1
Finish - Shellac - Seal Coat - 1
Finish - Stain Controller - 1
Finishing Epoxy - Cue Components - 2
Foam Brushes - 1
Foam Brushes - 10 Pak 2" - 10
Foam Brushes 1" - 24
Front - BirdsEye Front - WOW - 8
Front - Coco, Holly Purple veneer 8p - 1
Front - Curly, Coco, Holly - 8 Point - 1
Front - Madrone Burl - Custom Buttsleeve - 1
Front - Madrone Burl Front - 1
Front - PH, Holly Dbl Black veneer 8p - 1
Front - Thuya Burl Front & Buttsleeve - 1
Full Splice Blank - Bocote - 1
Full Splice Blank - Curly & African BW, Mark Bear - 1
Full Splice Blank - Ebony/Purpleheart - 1
Full Splice Blank - Purpleheart - 1
Full Spliced Blank (Sneaky) Bocote & Curly Maple Front - 1
Full Spliced Blanks - Ebony/Purpleheart - 2
Glaze - GF Pitch Black - 1
Glaze -Burnt Umber - 1
Gorilla Instant glue - 1
Handle Dowels, Maple - 20
Handle Dowels, Maple - 10
Handles - Cored Maple Handles - 5
Inserts - 5/16-14 - 20
Inserts - 5/16-14 - 10
Inserts - 5/16-14 Self aligning - 5
Isoplast 1.5" x (21", 27.75", & 20") - 3
Isoplast 1.5" x 25" - 1
Ivory chunks/slabs - 2+ Pounds - 1
Ivory from Auction - 1
Joint Collar - Stainless Steel - 5
Joint Collar - Stainless - 2
Joint Pin 3/8-10 (.308 Min. Dia) - 1
Joint Pin 3/8-10 Black G-10 - 2
Joint Pins 5/16-14 - 5
Joint Protector Stud 3/8-10 - 10
Joint Protector Stud 5/16-14 - 30
Laminated blanks 1.5 x 1.5 x 31 - 6
Lams squares for Coring, 1"x 1"x16.5" - 25
Lams, Dowels for Coring .75 x 15.5 - 9
Latex Tubing - 1
Lathe Chuck - 3-Jaw for Taig 1.375 bore, 1 9/16-32 fits Hightower, Taig & others - 2
Lathe Point Fixutre - Long (Hightower) - 1
Lathe Point Fixutre - Short (Hightower) - 1
Leather Burnisher - 1
Leather String - Braided cord for Chalk Holders 1yd each - 5
Leather Wrap Fixture & CD (Hightower) - 1
Linen - Irish Linen - Black/Walnut Brown - 1
Linen - Irish Linen - Solid Black - 1
Linen - Irish Linen - Walnit Borwn/Black - 1
Linen - Irish Linen - White/Black - 1
Linen - Irish Linen - White/Double Black - 1
Linen - Irish Linen - White/Double Brown - 1
Linen - Irish Linen Single - Black/Blue - 1
Linen - Irish Linen Single - Black/Red - 1
Linen - Multiple Spool Holder (Plano) - 1
Linen Press - 1
Linen White and Brown - Partial roll - 1
Live Center - 1
Loctite Gel CA, Cue Wax, Magic Eraser - 1
Maintenance Arbors - 11
Maintenance Arbors 3/8-10 - 1
Maintenance Arbors 5/16-14 - 1
Misc Equip from Surplus Center - 1
Misc Supplies from Home Depot - 1
Motor & Foot Peddle - 1
Motor Speed Control - 1
Phenolic - Double Black Linen - 1
Pin - Black G-10 "F" Style - 1
Pin 3/8-10m SS - 2
Pin 5/16-14 SS - 2
Pins - 5/16-14 Self aligning - 10
Pins - 5/16-14 Self aligning - 5
Pins 3/8-10 F .308 Minor Dia. - 3
Plastic 4101 .750 x 25" - 4
Plastics Bags 3 x 4.8 - 20
Plastics Bags 4.3x6.3 - 20
Pocket Chalkers - Leather wrap type - 24
Polishes - Wizards turbocut & Shinemaster, 3M II - 3
Rags - 1 lb. Bag - 1
Reamer - .312 Carbide Tipped - 1
Reamer - .631 - 1
Reamer - .760 - 1
Reamer .251 - 1
Rings - Nickel Silver - .015 Butt - 10
Rings - Nickel Silver - .015 Joint - 10
Rings - Nickel Silver - .030 Butt - 10
Rings - Nickel Silver - .030 Joint - 10
Rings Billets - PH & Holly (Set of 3) - 1
Rod - Aegis II - 1' Tube - .750 x 1.375 x 1' - 1
Rod - Aegis-II - 1 foot Tube .625 x .906 x 1.000 - 1
Rod - Aluminum 3/8-10 - 1
Rod - Black and White Delrin 1.5" - 12
Rod - Juma Ferrule rod - 1
Rod - Juma Rod - Butt 1' - 1
Rod - Juma Rod - Joint 1' - 1
Rod - Stainless 3/8-10 - 1
Rod - Stainless 5/16-14 - 1
Router Bit - 3/4" - 1
Router Bit - 3/4" - 4
Router Bits - 3
Sanding Rolls - 7
Sandpaper - 1
Sandpaper - 1200 - 50
Sandpaper - Klingspor Silicon Carbide 1000 - 1
Sandpaper - Klingspor Silicon Carbide 1500 - 1
Sandpaper - Klingspor Silicon Carbide 2000 - 1
Sandpaper - Klingspor Silicon Carbide 800 - 1
 
Last edited:

bruppert

<Insert witty comment>
Silver Member
Items Included with Sale 2 of 2

More from the list

Scotch Brite - Maroon - 5
Scotch Brite, 1 of each - 3
Shaft Blanks - Purpleheart - 2
Shaft Cart - Holds 120 Shafts - 1
Shaft Dowels 1x30" - 50
Shaft Seal - 1
Shaft Sealer from CC 16oz - 1
Shaft Speed Seal 2 Shaft Sealer - 1
Shaft Speed Seal II - 1
Shafts - 30" Tapered Shafts - 4
Shafts - AA+ - 5
Shafts - AAA+ - 5
Shafts - Joe's Gold - 5
Shafts - Match Pair x2 - 2
Shafts - Match Pair x2 - 2
Shafts - Premium Vacuum - 5
Shafts - Purpleheart Shaft Dowels 30" - 3
Shafts - Purpleheart Tapered - 3
Shafts - Special - 12
Slitting Saw - 30mm x 8mm x .034 - 1
Slitting Saw - Mandrel - 1
Slitting Saw, Carbide - 1
Slitting saws and 1 mandrel - 6
Spur Driver - 1
Spur Driver - Spring Loaded - 1
Switch Boot Cover - 1UDL8 - 1
Switch for Lathe - 2VLR2 - 1
System V Polising Compounds - 1
Tack Clothes - 1
Taig 1050 Steel Jaws - 1
Taig Needle Bearing Center - 1
Tap - 3/8-10 4" long - 1
Tap - 3/8-10 4" long Zero Limit - 1
Tap 3/8-10 Piloted (.308 minor dia.) - 1
Tap - 3/8-16 7" long - 1
Tap - 5/16-14 tap - 1
Tap 1-9/16 - 32 For thread in Hightower type chucks - 1
Tap 3/8-10 4" reg - 1
Tap 3/8-10 PLT - .312 Pilot - 1
Taps - 5/16-14 taps - 3
Tenon Repair Kit (Threader, wax & dowels) - 1
Thumb Screws - 10
Tip Centering Tool - 1
Tips - 11 Layer Madman Break Tips - 25
Tips - 12 Layer - Unknown but poss Hercules - 20
Tips - American Eagle (S, M) - 1
Tips - American Raptor (S, M) - 1
Tips - Elkmaster 13MM complete box - 50
Tips - Elkmaster 14MM Complete box - 50
Tips - Lepro 14MM one missing 49 in box - 49
Tips - Madman - 11 Layer J/B - 10
Tips - Madman - Misc - 20
Tips - Madman, Single layer Cowhide - 25
Tips - Sniper Laminated Cue - 12
Tips - Triangle 13MM Complete box - 50
Tips - Triangle 14MM complete box - 50
Tips - Triangle Tips - Box of 50 - 50
Tips - Water Buffalo - 50
Tips LePro (50) - 50
TiteBond III glue - 1
Tommy Bars - 1
Tool Bit - Cut-Off tool - 1
Tool Bit, 1/4" M2 - 6
Toolpost - Quick Change Tool Post + 5 Tool Holders - 1
Toolpost for Hightower - 1
Tools - Bell Center Punch - 1
Tools - CNC Stand/Cabinet - 1
Tools - Dial Indicator .0005 - 1
Tools - Dial Indicator 2" x .001 - 1
Tools - Dial Inicator Point Set - 1
Tools - Digital Scale - 1
Tools - Dowel Pins 5/32 (for pinning Chucks Jaws) - 1
Tools - Ground & Hardened Pins - 1
Tools - Hearing Protection - Peltor Radio Eearmuff - 1
Tools - Indicator - Peacock .0001 - 1
Tools - Moisture Meter - 1
Tools - Pins Gages - .251 - .500 - 1
Tools - Slotted Milling Table - 1
Tools - Tachometer - 1
Tools - Tool Grinder - Dual tables (minus stand) - 1
Tools (Carbide lathe bits, Drill/tap, etc..) - 1
Transtint - Dark Vintage Maple - 1
Transtint - Medium Brown - 1
Transtint - Purple - 1
T-Slot Nuts - 4
Vacuum Chamber - 1
Veneer = Burgandy .6mm - 4
Veneer = Purple .6mm - 4
Veneer = Red .6mm - 4
Veneer Cutting Fixture - 1
Way Lube - 1
Weight Bolts 3/8-16 Aluminum with screw - 5
Weight Bolts 3/8-16 Steel with screw - 10
Weight Bolts bag of 10 - 2
White Phenolic Butts - 1
White Phenolic Collars - 1
White Phenolic Shaft Collars - 1
Wood - 10 Burl Blanks - Museum Quality 1x1x5.5" - 10
Wood - 4 pak Ipe, Cambara, Goncalo.Alves and Cumaru - 1
Wood - African Blackwood - 1
Wood - African Blackwood 1-3/8 x 10-3/4" - 1
Wood - Amboyna Burl 1.5 x 4 x 7.625 - 1
Wood - Amboyna Burl 2 x 2 x 18 - 1
Wood - BE Maple 1-1/2 x 12-5/16" - 1
Wood - BE, Kamphi RW, Crape Mertle, Indian RW and B/W Ebony - 6
Wood - Birds Eye 1.5 x 1.5 x 18 - 1
Wood - Birds Eye 1.5 x 1.5 x 18 - 1
Wood - Birdseye Maple (1-1/2" x 1-1/2" x 13") - 2
Wood - Birdseye Maple (1-1/2" x 1-1/2" x 14") - 3
Wood - Birdseye Maple (1x12" doweled - 1
Wood - Birdseye Maple Turning Dowels 1-5/8" x 16" - 10
Wood - Birdseye Maple Turning Dowels 1-5/8" x 16" - 10
Wood - Black and White Ebony 1.5 x18 - 1
Wood - Black Palm - Wood 24" - 1
Wood - Black Palm (1" x 1" x 12") - 1
Wood - Black Walnut Squares 1-3/8 - 15: - 7
Wood - Bocote - 4
Wood - Bocote - 1
Wood - Bocote (1" x 12", doweled) - 1
Wood - Bocote 18" - 2
Wood - Brazilian Ebony - 9
Wood - Brazilian Rosewood Plank 1.5 x 6 x 34 - 1
Wood - Bubinga (1" x 12", doweled) - 1
Wood - Buckeye Burl - 3-1/4 x 3-1/4 x 18-1/2 - 1
Wood - Bundle #2 (1" x 1" x 12" (13 pcs.)) Part 1 - 6
Wood - Bundle #2 (1" x 1" x 12" (13 pcs.)) Part 2 - 7
Wood - Camphor Burl 2-13/16 x 13-3/16" - 1
Wood - Camphor Burl 3-3/4 x 19" - 1
Wood - Camphor Burl 2 5/8 x 5 3/8 x 14 3/16" - 1
Wood - Camphor Burl 2 9/16 x 5 3/8 x 15 3/4" - 1
Wood - Canarywood 18" - 2
Wood - Chechen - 1
Wood - Cocobolo - 36" - 6
Wood - Cocobolo Turing Wood - 20
Wood - Curly Maple - Read Leaf 18" - 4
Wood - Dot Ebony 1.5 x 18 - 2
Wood - Ebony - 1.5" x 10" - 5
Wood - Ebony Dowel 1-3/8 x 6.5" - 1
Wood - Ebony Dowel 1-3/8 x 12" - 4
Wood - Ebony Square - 1
Wood - Ebony Tapered Front - 1
Wood - Ebony wood - 3
Wood - Ebony wood 1.5 x 1.5 x 18 - 1
Wood - Fiddleback (Curly) maple Dowel - 5
Wood - Figured Zebrawood (1-1/2" x 1-1/2" x 18") - 2
Wood - Gaboon Ebony (1" x 1" x 12") - 3
Wood - Goncalo Alves (1" x 1" x 12") - 1
Wood - Holly (Varies in size) - 3
Wood - Holly 15/16 x 3 7/8 x 18" - 1
Wood - Laminated Cue Blank (Red, White & Blue) - 1
Wood - Leopard wood 1.5 x 1.5 x 18 - 1
Wood - Leopardwood (1" x 1" x 12") - 1
Wood - Leopardwood (1" x 12", doweled) - 1
Wood - Malagasy Ebony 1-13/16 x 2-3/4 x 14-7/8" - 1
Wood - Marblewood 24" - 1
Wood - Olivewood (1" x 1" x 12") - 1
Wood - Osage Orange - 1
Wood - Padauk - 4
Wood - Padauk - 2
Wood - Pink Ivory - 1
Wood - Pomelle Sapele 1-1/2 x 20-1/2" - 1
Wood - Purpleheart (1" x 1" x 12") - 2
Wood - Purpleheart (1" x 12", doweled) - 2
Wood - Purpleheart (1" x 18", doweled) - 1
Wood - Purpleheart (1-3/8" x 18", doweled) - 5
Wood - Purpleheart 18" - 4
Wood - Purpleheart Dowels 1" x 15" - 12
Wood - Purpleheart Dowels 1-3/8" x 18" - 5
Wood - Quilted & Curly Maple Blanks - 5
Wood - Red Palm 24" - 1
Wood - Redheart - 1
Wood - Redheart (1" x 1" x 12") - 1
Wood - Redheart 1.5 x 1.5 x 18 - 1
Wood - Rosewood E. Ind - 2
Wood - Snakewood (15/16" x 15/16" x 11-7/8") - 1
Wood - Spalted Maple 1.5 x 1.5 x 18 - 1
Wood - Spalted Tamarind - 1
Wood - Spalted Tamarind - 1
Wood - Spalted Tamarind 1-3/4 - 10" - 1
Wood - Tamboti - 1
Wood - Thuya Burl (1" x 1" x 6") HIGHLY FIGURED - 1
Wood - Wenge Dowel 1-3/8" x 18" - 1
Wood - White Ash (1" x 1" x 12") - 1
Wood - WHITE TEAK BURL 2" x 2" x 6" - 1
Wood - Yellowheart (1" x 1" x 12") - 1
Wood - YellowHeart 18" - 2
Wood - Zebrawood - 2
Wood - Zebrawood 18" - 1
Wood - Ziricote 1-5/8 x 20" - 1
Wood - Ziricote (1" x 1" x 12") - 1
Wrap - Python - 1
Wraps - Cork Wraps - 20
Wraps - Leather wraps - 4

Cuesmith Deluxe Lathe - 1
POWER FEED Stop Electronic - 1
Metal Dust Cover for Bed - 1
6" BORING BAR (with square shank) - 1
Mini Boring Bar - 1
Butterfly & Full-Splice Mitering Jig - 1
Compound Cross Slide - 1
Steam Gun - 1
Tenon Threader for Stainless Joint (5/8-11) - 1
Automatic Tip Shaper (Bit & Holder) - 1
One Inch Vertical V-Bit for cutting points - 1
Black Epoxy Dye - 1
Multi. Position Router Bracket - 1
1.25" diameter 6 Wing Cutter 1/4" shank - 1
1/8" Collet for 7310 - 1
Interchangeable Shaft Taper Bars - 1 - 1
 
Last edited:

sileighty_guru

5A Grade Wood Pecker
Silver Member
Wow I'm impressed just by the details of the list! Wish you were closer. Good luck with the sale... really a lot to take in by the photos, good thing for the detailed list! Good luck with your "other" hobbies.
 

bruppert

<Insert witty comment>
Silver Member
Nice offering man. I will take the tail stock if you would sell it separately.

Thanks T but I really want to sell it as a lot. If I piece it out the Lathe would probably come with everything I bought from Chris. The Deep Drilling tailstock might be doable though. I'll keep you in mind if I piece it out.

That list should be at least 98% accurate SG. Ya know, Maine ain't all that far away and Baltimore is pretty mice in the spring :)
 

CroweCues

AzB Silver Member
Silver Member
wow

i must say that is impressive. Im saying this with all honesty, if you was one year out with this, im sure we would be talking. Great job on the list, absolutely mind blowing. :thumbup: :thumbup: :thumbup:
 

bruppert

<Insert witty comment>
Silver Member
Updated

I updated the above lists. I removed some stuff that most people would not need. things like my personal respirator, steel stamps, micrometer head, 1x2x3 blocks, etc... And I sorted the list.

I also reduced the price by $2,000 (FYI, the non-cue related items I removed are worth much less than the $2,000 I took off the price)
 
Last edited:

bruppert

<Insert witty comment>
Silver Member
Shipping

Would you be willing to deliver to Florida? :D

Well if you're seriously interested shoot me a PM.

There are ways to get it shipped. We use to buy a lot of antiques at online auctions in different states. We usually had UPS go there, wrap, pack and ship the items. Can't say the shipping was cheap but it wasn't as bad as we thought it was going to be. And that was a lot of fragile stuff (Glass, Ceramics, China, etc...) so they had to take care in wrapping and packing. Most of the stuff in the shop like wood can just be piled into a box. Other stuff like the lathe and Dust Collector I'd want someone else to pack and be responsible for. The other stuff I don't mind packing, we shipped stuff all over the world so that packing is no big deal for me and I have tons of boxes (although most are for the US Post Office).
There are also long haul trucking companies.

PM me if you're interested.
 

bruppert

<Insert witty comment>
Silver Member
Sold

The shop has been sold.

Thanks to everyone for the interest and everything else from the past several years!!!!

B
 

CroweCues

AzB Silver Member
Silver Member
Congrats on the sale. Good luck in all you future projects. dont forget to stop in from time to time and pick on some of us new guys.
 

Blue Hog ridr

World Famous Fisherman.
Silver Member
Hey, take up Fishing and then add Fly Fishing in on it. That will take care of any extra money you might have.

You still gets me Isoplast?
 
Top