My Rare Snooker cues Predator and MEZZ

nsafellow

AzB Gold Member
Gold Member
Silver Member
I have a couple of snooker cues that I think none of you have ever seen.

Here is a Predator that does not exist anywhere outside of Asia.
It is a P3 SNKR with a 314-2 snooker shaft and three extensions for reach in a Mezz snooker cue case

ab82cd417f26208f932b6ee29461d530.jpg


7d6e36bbd7514a8e3b651f1b5b5965b8.jpg


fca7d1811ff7eb25e2a39babedf32765.jpg


b9a2696a8fd1980fd16e68324e3cc6a6.jpg


This is a really nice hitting snooker cue with the low deflection 314-2 shaft that is 41” long. Tip is 9.5mm Kamui medium snooker.

Each 8” extension connects to the other for an 8”, 16”, or 24” extension.

I got this out of Thailand a few years back and have never seen another.



Here is my MEZZ snooker cue and the grey MEZZ snooker case for it.

It has a Cocobolo butt and Cocobolo short extension with their metal telescopic extension that goes from 21” to 38”.

Very beautiful full grain on the Cocobolo butt and extension. It has a 9.5mm tip on the V95 low deflection shaft with the adjustable weights in the shaft not in the butt so the balance is not affected if you change them.

Really nice hitting snooker cue.

a6efd222b0e10a7ab3c4829fcd235636.jpg



dc3126f905de9e503945457637be207e.jpg





2ae98f1f0d78e8a8448d51a3b959bbff.jpg




This is my hand made Super Match Ebony snooker cue.

This is a typical ash snooker cue that most players use.

It has a 9.5mm tip on it.


e4871da90a43cc380f6cf61299af65cc.jpg


0035656f8324fdb53a6dc54dbe98ee12.jpg





......
 

Greg M

Active member
So odd to see a Mezz's woods so cut evenly like that instead of being glued and spliced like a traditional snooker cue.

Looks like a traditional taper on your hand spliced cue, but is it the same with the top two? Or do they have American tapers?
 

nsafellow

AzB Gold Member
Gold Member
Silver Member
So odd to see a Mezz's woods so cut evenly like that instead of being glued and spliced like a traditional snooker cue.

Looks like a traditional taper on your hand spliced cue, but is it the same with the top two? Or do they have American tapers?
they are traditional taper
 

nsafellow

AzB Gold Member
Gold Member
Silver Member
Yes it is a uniloc joint but no it will not fit a pool cue as the joint is at 3/4.
So it is so much thicker there. To say nothing about the fact that the shaft is 41” long that would make you cue 70” long and having a 9.5mm tip on it
 
Top