Madden, It was made in Phx Az I would have to say that is was made after 2000 I have had it for awhile.
Shaft is 13.2mm, 29in Mashon H macarta ferrule wizard m tip.
I think the forarm is parfuo wood 3/8 10 or 11 not shur.
White with brown spec.
Rose wood butt sleeve.
Brass ring in cap.
It should weight 19.5 or under the weight can be changed.
Butt is 29in and has a small ding in it.
Cue is stright, refinished by Greg Sowder in Vancover Wa.
Brian Mordt
Older cue i think it was made while he was at Pappys sports bar.
Shaft is 29.5in 12.33 at ferrule Mashon H macarta ferrule wizard m tip, it dose have taper roll the tip is flat when rolled its in the taper, i dont feel it is warped. The ferrule has a crack it happend right after the refinish, I can give a new masohn ferrule it is a shorter one.
Second shaft is a Mc D shaft 29in 12.73 at tip, I dont know what the ferrule is wizard m tip.
The butt is 28.75in, 3/8 10, maple forarm 6 ebony points 3 high 3 low 2 venners black then maple, black whith white spec, ebony butt sleeve with ring work. I dont know if the weight can be changed it looks like its glued in.
I dont know what the joint or butt cap are made of.
Both cues were refinished last year by Grege Sowder of Vancover Wa.
Let me know if we can work somthing out.
Thanks Rick.
Shaft is 13.2mm, 29in Mashon H macarta ferrule wizard m tip.
I think the forarm is parfuo wood 3/8 10 or 11 not shur.
White with brown spec.
Rose wood butt sleeve.
Brass ring in cap.
It should weight 19.5 or under the weight can be changed.
Butt is 29in and has a small ding in it.
Cue is stright, refinished by Greg Sowder in Vancover Wa.
Brian Mordt
Older cue i think it was made while he was at Pappys sports bar.
Shaft is 29.5in 12.33 at ferrule Mashon H macarta ferrule wizard m tip, it dose have taper roll the tip is flat when rolled its in the taper, i dont feel it is warped. The ferrule has a crack it happend right after the refinish, I can give a new masohn ferrule it is a shorter one.
Second shaft is a Mc D shaft 29in 12.73 at tip, I dont know what the ferrule is wizard m tip.
The butt is 28.75in, 3/8 10, maple forarm 6 ebony points 3 high 3 low 2 venners black then maple, black whith white spec, ebony butt sleeve with ring work. I dont know if the weight can be changed it looks like its glued in.
I dont know what the joint or butt cap are made of.
Both cues were refinished last year by Grege Sowder of Vancover Wa.
Let me know if we can work somthing out.
Thanks Rick.
Attachments
Last edited: