ratcues's latest activity

This is one of the biggest changes to cue building that I've seen in the past ten years. Back in the late 1900s, when I got into...

A 1/16th of an inch isn't worth the hassle or cost of repairing.

If you can see the warp, you aren't turning it out.

Wipe with DNA and see if the spots disappear while wet. If they go away while wet but come back when dry, its just embedded dust. If the...

1. You may be cutting too much too fast causing tool pressure. 2. Raise your cutter. Your center height is too low.

If that job took me more than 30 minutes, I'd quit. Four hours is crazy but for $50, you got a good deal and he lost his ass.

I don't sue bearings on mine. Just the Delrin roller on the shaft. Before, I was changing out the bearings every six months or so due to...

Muellers bought Porper is the early 2000s. To my knowledge, there is no patent or protections.