Recent content by Steve Dickey

Thanks for the update. You're making good progress.

Here you go Jay. By the way, your old Anniversary is up and running again.

Don't forget the score counters.

Good job! My castings had a poorly finished reliefs that I chased with a file to clean up.

Exactly as Hungarian said. As far as chalk goes I've always been able to reach in and grab it so I don't know if it would push through.

Thanks. The outboard surface of one of my pedestals was pretty beat up due to sun damage. I knew I would not be able to get a decent finish on it so I re-veneered them. Then as one thing leads to another, in an effort to have a similar finish on all the wood I did the same thing to the skirts...

I have had zero problems with balls hanging up, the gullies are tucked up high and out of the way.

They do. That is what I did with mine.

This appears to be Savannah's home table. I found it interesting that given her age she chose a GC1. At any rate, she did get one of the best to calibrate the rails and set it up. One very nice home table.

Iusedtoberich, Is there an issue with bulb life and/or projector cooling with the projector pointed almost straight down when placed above the side pocket? Thanks, Steve

Look fantastic, time to enjoy.

Agree 100%

Help me out on this. What does that mean? Rodney at a 764, and Greg at 699, is a 65 point difference. According to Fargorate a fair race (even) for a 58 point difference would be a 9-6 race, or (X3) a 27/18 race. The result, 28-18, would indicate Fargorate's estimation was pretty much right on.

Congrats on your purchase. I polished my bands and corner castings. You will go through the anodizing if you go that way. Post your results when you get a chance.