4th Cue....Randy Anderson 4 Bridged Points Ebony on Ebony
️Twin to the cue i already posted️
SpecsRandy Anderson 4 Bridged Points Ebony on EbonySpecsEbony on Ebony
4 Bridged Points
4 Boxes, Windows, Chevrons
Blue, Silver, Peacock, Blue with BK Papers
Silver Spears and Oval Inlays
Chain link rings
Butt: 15.3 oz
Shaft 1: 13 mm, 3.95 oz
Shaft 2: 13mm, 3.95 oz
Shaft 3: 13mm, 3.8 oz
Pin: 3/8x10
Matching j/ps
Leather: Genuine EE
Ferrules:
Matching Extension
This cue starts with highly decorated butt sleeve and it keeps going this way all the way till the joint and the to j/ps. It shows diversity in styles and building techniques that needed to be used.
Everything matches up perfectly and Randy really knocked it out of the park.
About Randy Anderson SpecsEbony on Ebony
4 Bridged Points
Veneers; White, Silver, Peacock, Blue
4 Boxed Windows & Chevrons
Silver Spear and Oval Inlays
Chain Link Rings
Matching j/ps
Matching Extension
Leather: EE wrap
FerrulesDelrin Butt cap
Butt: 15.5 oz
Shaft 1: 13 mm, 3.5 oz
Shaft 2: 13 mm, 3.6 oz
Pin: 3/8x10
Randy Anderson is from Wichita, Kansas and started building cues in 1983. Verl Horn helped him to build his 1st cue and mentored him. So far he built 800 cues or more and he does something what only a few ones do nowadys and it is that he builds fullsplice cues....he builds his own blanks.
He also makes 3 different tapers for his cues and the one that was used in this one is middle ground.
Randy Anderson I started wanting to service my own cues because it took so long to get them back, this was 1981. Then I put a small lathe together to do tips and ferrules. Then I went to a tournament in west Oklahoma where I met Verl Horn and started getting interested in building cues. Over the next few years, I got more involved. In 1987, I took an ad in Pool and Billiard magazine and started selling cues. The response was overwhelming, and I couldn't keep up. Then in 1994, I had a heart attack at 36 years old. So I had to cut way back. I continued to build cues, but more on a local level. In 2016, I decided I wanted to go to CNC instead of my pantagraph and that lead to much betters designs and a need to learn new skills. I advanced to build my own CNC, and I feel it has helped to elevate my cues to a much higher level.
Experience on dealing with Randy Since there are some cue makers that don't treat customers nicely, take deposits saying cue will be finished in 3,4 months and then 3 years after, still wouldn't deliver cue and sometimes even stop responding to customer's messages, i decided whenever i post a cue i got, to say a few things about dealing with that particular maker.
This bad type of treatment, numerous delays cause hesitation on customers to order a custom cue so they should know there are plenty of great cue makers who are reliable, polite, nice and would do work on time and make them satisfied. Randy is one of them
So, Randy is more than a man of his word. Old school type of guy and stands behind his words. What he says he will do that is what he will do.
Beside, making an agreement with him and to order a cue is very easy and pleasant and he treats customers more than nicely and with respect. Responds fastly and promptly and would even give you a suggestion if there is something what might wouldn't work nicely in regards to aesthetics.
He has been around for years so he knows how to build a great cue and how a great cue should play.
Randy Anderson
This cue starts with highly decorated butt sleeve and it keeps going this way all the way till the joint and the to j/ps. It shows diversity in styles and building techniques that needed to be used.
Everything matches up perfectly and Randy really knocked it out of the park.
About Randy Anderson Randy Anderson is from Wichita, Kansas and started building cues in 1983. Verl Horn helped him to build his 1st cue and mentored him. So far he built 800 cues or more and he does something what only a few ones do nowadys and it is that he builds fullsplice cues....he builds his own blanks.
He also makes 3 different tapers for his cues and the one that was used in this one is middle ground.
Randy Anderson I started wanting to service my own cues because it took so long to get them back, this was 1981. Then I put a small lathe together to do tips and ferrules. Then I went to a tournament in west Oklahoma where I met Verl Horn and started getting interested in building cues. Over the next few years, I got more involved. In 1987, I took an ad in Pool and Billiard magazine and started selling cues. The response was overwhelming, and I couldn't keep up. Then in 1994, I had a heart attack at 36 years old. So I had to cut way back. I continued to build cues, but more on a local level. In 2016, I decided I wanted to go to CNC instead of my pantagraph and that lead to much betters designs and a need to learn new skills. I advanced to build my own CNC, and I feel it has helped to elevate my cues to a much higher level.
Experience on dealing with Randy Since there are some cue makers that don't treat customers nicely, take deposits saying cue will be finished in 3,4 months and then 3 years after, still wouldn't deliver cue and sometimes even stop responding to customer's messages, i decided whenever i post a cue i got, to say a few things about dealing with that particular maker.
This bad type of treatment, numerous delays cause hesitation on customers to order a custom cue so they should know there are plenty of great cue makers who are reliable, polite, nice and would do work on time and make them satisfied. Randy is one of them
So, Randy is more than a man of his word. Old school type of guy and stands behind his words. What he says he will do that is what he will do.
Beside, making an agreement with him and to order a cue is very easy and pleasant and he treats customers more than nicely and with respect. Responds fastly and promptly and would even give you a suggestion if there is something what might wouldn't work nicely in regards to aesthetics.
He has been around for years so he knows how to build a great cue and how a great cue should play.
Randy Anderson
