Amazing offering of a 6pt Ed Young wrapless which is about as rare as they come as most are in someoneās collection never to be released again. If youāre not familiar with with a Mr Young he made his cues out of the Kersenbrock shop and didnāt make a ton to begin with and all specs would be a Mr DPK as it was always rumored ole DPK was majorly involved with the making of each cue 
. Butt has a few small dings in it as itās been played but nothing through the clear and I couldnāt capture them in a pic. I polished and cleaned the shafts last night and it looks amazing and no dings or dents in the amazing shafts with the older wood used they are killa!!!!!! This is a paroblic cue from the originator of the paroblic cues shop so there is the tiniest bit of movement at the joint as to be expected but it rolls amazing for one. It rolls amazing considering on rollers and the shafts do also but I will always say a tiny bit of taper roll on the shafts to be safe but you will be happy with this amazing offering 
Cue hits so stiff and responsive and that amazing ping sound you only seem to get from a handful of cues and they seem to originated from this very shop āKersenbrockā shop. You can spend 12-15k for a cue that mimics this cues heritage or you can buy one that came from the original shop for half ā¦..why see a cover band when you can see the real one for less money 
58 inch even split
3/8-11 pin of course
Butt 14.85 and can add weight or take a little out it appears to have a small weight bolt
Shaft 1. 12.9mm 3.85oz
Shaft 2. 12.7mm 3.8oz
Shaft 3 12.6mm 3.75
Sold
. Butt has a few small dings in it as itās been played but nothing through the clear and I couldnāt capture them in a pic. I polished and cleaned the shafts last night and it looks amazing and no dings or dents in the amazing shafts with the older wood used they are killa!!!!!! This is a paroblic cue from the originator of the paroblic cues shop so there is the tiniest bit of movement at the joint as to be expected but it rolls amazing for one. It rolls amazing considering on rollers and the shafts do also but I will always say a tiny bit of taper roll on the shafts to be safe but you will be happy with this amazing offering Cue hits so stiff and responsive and that amazing ping sound you only seem to get from a handful of cues and they seem to originated from this very shop āKersenbrockā shop. You can spend 12-15k for a cue that mimics this cues heritage or you can buy one that came from the original shop for half ā¦..why see a cover band when you can see the real one for less money 58 inch even split
3/8-11 pin of course
Butt 14.85 and can add weight or take a little out it appears to have a small weight bolt
Shaft 1. 12.9mm 3.85oz
Shaft 2. 12.7mm 3.8oz
Shaft 3 12.6mm 3.75
Sold
Attachments
Last edited: