Brunswick GC2 Snooker Pockets

[ken ken quarter]

Are the soft plastic drop pockets on a 5 x10 GC2 the same size and pattern as the pockets on a 4 1/2 x 9 GC2 pool table? Do they mount with the same 8-32 socket head cap screw? Supplier better than Muellers? Thanks Ken Ken.

 

[scruffy1]

Are the soft plastic drop pockets on a 5 x10 GC2 the same size and pattern as the pockets on a 4 1/2 x 9 GC2 pool table? Do they mount with the same 8-32 socket head cap screw? Supplier better than Muellers? Thanks Ken Ken.

The pockets are the same. May have to trim to accommodate smaller casting. Same screws.

 

[PUTT4DACA$$H]

Pocket srew size?

Do they mount with the same 8-32 socket head cap screw? Supplier better than Muellers? Thanks Ken Ken.

All my Gold Crown castings use 10-24 for the hex cap screws by 3/4" in length.

Double check your size before you buy boxes of 100.

I might have oddball/ different size screws out here, they may not be the same as yours.

Good Luck

Gordon Graham

 

[ken ken quarter]

Thanks for the feedback on the pocket size.I tried one off of the snooker table on the pool table and the mounting holes matched. Yes my castings take a 10-24 not the 8-32 I posted. Had just finished repairing a coin slot operator with an 8-32 and it came out as I posted without proofing. Thanks again Ken Ken.