www.billiardbills.com
MINT GILBERT CUSTOM CUE
$1,799 Shipped!
A very nicely designed conversion by Gilbert Custom Cues in pristine condition!
The butt of this cue was converted from a vintage Brunswick Willie Hoppe Titlist
The Titlist is mahogany fully spliced into straight grain maple with veneers between the splice
4 Veneers of purple, teal, mahogany and maple
Solid Ivory joint
Thick Ivory Hoppe ring with silver rings above and below
26 Total inlays of Mother of Pearl are in this cue
Each point has 1 inlay of a notched diamond made of Mother of Pearl
Each point has 3 Mother of Pearl dots, 2 below the notched diamonds and one above
The butt sleeve contains 14 inlays of Mother of Pearl consisting of 4 notched diamonds with 1 dot above and 1 below each and then one in between each notched diamond
A very nice feeling Cortland Irish linen wrap perfectly installed and pressed nicely
Black phenolic joint collars and butt cap
Ringwork at the joint and shaft collars are single silver rings
Stainless steel 3/8x10 joint pin
Butt is 29" & 15.65oz
Shaft 1 is 29" & 4.13oz
Ferrule 1 is 13mm & LBM
Shaft 2 is 29" & 4.01oz
Ferrule 2 is 13mm & LBM
www.billiardbills.com
Capone Titlist w/Maple Ferruled Shafts
$1,799 Shipped!
Excellent Condition but does have a part of one of the veneers that did not come out perfect which does frequently happen with conversion cues
Vintage Willie Hoppe Brunswick Titlist Conversion
Full splice with veneer construction
Titlist veneers of purple, teal, mahogany and maple
Brown phenolic collars with stitched rings with matching Titlist veneers
White phenolic joint collar
White with brown spec Irish linen wrap
Brass Radial joint pin
Butt is 29" & 15.56oz
Shaft 1 is 29" & 3.43oz & Ferrule-less @ 12.75mm UNCHALKED
Shaft 2 is 29" & 3.4oz & is Ferrule-less @ 12.5mm
MINT GILBERT CUSTOM CUE
$1,799 Shipped!
A very nicely designed conversion by Gilbert Custom Cues in pristine condition!
The butt of this cue was converted from a vintage Brunswick Willie Hoppe Titlist
The Titlist is mahogany fully spliced into straight grain maple with veneers between the splice
4 Veneers of purple, teal, mahogany and maple
Solid Ivory joint
Thick Ivory Hoppe ring with silver rings above and below
26 Total inlays of Mother of Pearl are in this cue
Each point has 1 inlay of a notched diamond made of Mother of Pearl
Each point has 3 Mother of Pearl dots, 2 below the notched diamonds and one above
The butt sleeve contains 14 inlays of Mother of Pearl consisting of 4 notched diamonds with 1 dot above and 1 below each and then one in between each notched diamond
A very nice feeling Cortland Irish linen wrap perfectly installed and pressed nicely
Black phenolic joint collars and butt cap
Ringwork at the joint and shaft collars are single silver rings
Stainless steel 3/8x10 joint pin
Butt is 29" & 15.65oz
Shaft 1 is 29" & 4.13oz
Ferrule 1 is 13mm & LBM
Shaft 2 is 29" & 4.01oz
Ferrule 2 is 13mm & LBM
www.billiardbills.com
Capone Titlist w/Maple Ferruled Shafts
$1,799 Shipped!
Excellent Condition but does have a part of one of the veneers that did not come out perfect which does frequently happen with conversion cues
Vintage Willie Hoppe Brunswick Titlist Conversion
Full splice with veneer construction
Titlist veneers of purple, teal, mahogany and maple
Brown phenolic collars with stitched rings with matching Titlist veneers
White phenolic joint collar
White with brown spec Irish linen wrap
Brass Radial joint pin
Butt is 29" & 15.56oz
Shaft 1 is 29" & 3.43oz & Ferrule-less @ 12.75mm UNCHALKED
Shaft 2 is 29" & 3.4oz & is Ferrule-less @ 12.5mm
