Hello. I am posting this to ask for help in finding out who made a cue that I have. I have tried doing this myself, but have had no success. All my leads have not panned out. Since some cue makers have certain trade marks I am listing a lot of info to help narrow it down.
Here is the info: Cortland wrap 13" in length. Both butt and shafts are 29". All white is believed to be ivory. Joint is solid white 1" thick and .839 in diameter, pin is 5/16X18 and is 1 3/16" long, ebony points are 4" with veneers points are 7", veneers are .8mm thick and are natural,green,red, blue.All ring work is .38" thick, butt is 1 1/4" diameter, is bumperless and requires a 1/4" L wrench to remove,Butt weighs 15.6oz, balance point is 19" which is 2" above wrap, butt sleeve is 2 1/8" between rings. The ring above wrap is the same design 3 times devide by a yellow X. Butt sleeve has 4 white windows and 4 brown strips with 6 notched diamonds.
More in next post.
