I have the following lathes and tooling for sale in Detroit.
(prices would depend on tooling)
Atlas 12" metal lathe with 54" bed (fair but serviceable)
Atlas 12" metal lathe with 42" bed (like new)
One has a QC gear box, the other doesn't.
Walker Turner 12" wood lathe with about 36"-40" between centers
Delta Rockwell 12" wood lathe with steady and compound slide.
(this is set up with two headstocks, one to the right on a bed extension)
Delta Rockwell 9" wood lathe
I have about five three or four jaw chucks in 1 x 8 tpi including Delta, Supernova II, Oneway etc.
Many face plates.
In 1 1/2 x 8 tpi I have two 3-jaw buck adjust-tru some no name chucks and plenty of faceplates
Plain back chucks - I have two 6" Buck 6-jaw adjust-tru and a nice 5" Rohm 3-jaw
Dunmore toolpost grinder
Aloris BXA toolpost
Three Aloris CXA toolposts and about 25 tool blocks.
Several rocker style posts.
Many Williams, Armstrong, etc tool holders
Any mics, dial run out indicators, callipers, etc that you could use.
I have two new Baldor 1.5 or 2HP DC motors. Really nice.
I have two or three 1HP to 2HP DC motors with variable speed controlers.
(these are treadmill surplus actually but they all run)
I have two 1.5HP Baldor 3 phase AC motors (washable) plus some Alan Bradley Powerflex 4 VFD's to drive them.
I have quite a few (small) steppers and servos left over.
Sherline mill with lots of tooling. (no CNC)
Any of these machines could be set up to run an 1PH or 3PH power with variable speed.
All of these lathes are currently manual but if you wanted one to mill on three or four axis we might be able to set something up.
I have some excellent shaft wood. (200 or more blanks)
I have quite a bit of carbide and HSS
I need to clear some space.
Thank You,
Ed
edspeer1@earthlink.net
(prices would depend on tooling)
Atlas 12" metal lathe with 54" bed (fair but serviceable)
Atlas 12" metal lathe with 42" bed (like new)
One has a QC gear box, the other doesn't.
Walker Turner 12" wood lathe with about 36"-40" between centers
Delta Rockwell 12" wood lathe with steady and compound slide.
(this is set up with two headstocks, one to the right on a bed extension)
Delta Rockwell 9" wood lathe
I have about five three or four jaw chucks in 1 x 8 tpi including Delta, Supernova II, Oneway etc.
Many face plates.
In 1 1/2 x 8 tpi I have two 3-jaw buck adjust-tru some no name chucks and plenty of faceplates
Plain back chucks - I have two 6" Buck 6-jaw adjust-tru and a nice 5" Rohm 3-jaw
Dunmore toolpost grinder
Aloris BXA toolpost
Three Aloris CXA toolposts and about 25 tool blocks.
Several rocker style posts.
Many Williams, Armstrong, etc tool holders
Any mics, dial run out indicators, callipers, etc that you could use.
I have two new Baldor 1.5 or 2HP DC motors. Really nice.
I have two or three 1HP to 2HP DC motors with variable speed controlers.
(these are treadmill surplus actually but they all run)
I have two 1.5HP Baldor 3 phase AC motors (washable) plus some Alan Bradley Powerflex 4 VFD's to drive them.
I have quite a few (small) steppers and servos left over.
Sherline mill with lots of tooling. (no CNC)
Any of these machines could be set up to run an 1PH or 3PH power with variable speed.
All of these lathes are currently manual but if you wanted one to mill on three or four axis we might be able to set something up.
I have some excellent shaft wood. (200 or more blanks)
I have quite a bit of carbide and HSS
I need to clear some space.
Thank You,
Ed
edspeer1@earthlink.net
