michaelkatja
Registered
For sale is a Kenneth Murrell billiard cue from October 2003 with three shafts.
Two original OTs with new ferrules and tips by Arthur Queue+ one LD OT by Mike Becker.
Cue Description...
When I bought the cue, I asked Kenneth Murrell for a detailed description of the cue and
received the following answer...
Yes, I built the cue over a period of months in 2003. The points are pommelle bubinga spliced into birdseye maple with 4 veneers, black/blue/green/white. I use milled "V" bottom points in my short splices for forearms. The butt sleeve is bubinga, natural linen at the joint and butt cap. The handle section is hard maple, wrap is tobacco brown ostrich, the real thing. I don’t remember the weight, but it is most likely around 18.5-19 oz. 2 shafts with linen at the joint, linen ferrules, red fiber below the tips and moori medium tips. Brass 3/8 x 10 pin, balance should be about 19-19.5" from the butt cap. Bubinga joint protectors cut by hand on a wood lathe.
Hope this helps,
Regards,
Kenny
Photos of the cue can be found here...
c.web.de
The battle marks in the butt of the cue are only in the varnish, not in the wood.PS:The Predator 2/4 case in mint condition visible in the pictures is not part of the auction, but can be purchased in another auction or as part of a bundle.
Two original OTs with new ferrules and tips by Arthur Queue+ one LD OT by Mike Becker.
Cue Description...
When I bought the cue, I asked Kenneth Murrell for a detailed description of the cue and
received the following answer...
Yes, I built the cue over a period of months in 2003. The points are pommelle bubinga spliced into birdseye maple with 4 veneers, black/blue/green/white. I use milled "V" bottom points in my short splices for forearms. The butt sleeve is bubinga, natural linen at the joint and butt cap. The handle section is hard maple, wrap is tobacco brown ostrich, the real thing. I don’t remember the weight, but it is most likely around 18.5-19 oz. 2 shafts with linen at the joint, linen ferrules, red fiber below the tips and moori medium tips. Brass 3/8 x 10 pin, balance should be about 19-19.5" from the butt cap. Bubinga joint protectors cut by hand on a wood lathe.
Hope this helps,
Regards,
Kenny
Photos of the cue can be found here...
Ihr persönlicher Freigabelink | WEB.DE Online-Speicher
Mit diesem Link erhalten Sie Zugriff auf die mit Ihnen geteilten Daten.
c.web.de
