Lambros, PFD, Schon, Predator, Horn, Palmer, Porper

Captain K.

AzB Silver Member
Silver Member
Here are some other cues and cases I'll be letting go
From left to right
New McDermott Spalted Maple Geko with one of akind hand made 1/1 Gecko inlayed case
New Predator SE 7(Longoni) snakewood, with one of akind hand made 1/1 Predator inlayed case
New Predator first edition 4k6
used Palmer PB-3 all original, micarta ferrule

used Schon stitch rings, all original micarta ferrule SOLD

used Jacoby custom order multiple wood inlays, over 75 and orginal leather wrap 2 shafts
used Jack Justis Mike "The Train" Coltrain 2/4 case real silver stitching and has the Lambros Custom cues logo on lid

used Mike Lambros cue from Coltrain with leather wrap three shafts pre ultra- jointed era SOLD

Used Verl Horn Ivory jointed Ambonya burl ebony points Ivory stitch rings 2 shafts all original
used Joe Porper purple heart cue check decription and phots in thread
New Paul Drexler ,PFD studios cue custom ordered and based on the 403 model more Abolone was added to the cue all white is Ivory

I'll upload closer photos if wanted along with more detailed descriptions

Thanks
Kennan
 

Attachments

  • IMG_3698.jpg
    IMG_3698.jpg
    96.1 KB · Views: 1,591
Last edited:
Lambros

Mike Lambros Custom Cue 1999 made for Mike Coltrain SOLD
Butt: 15.6oz., 29'' Maple Forearm, Kingwood Buttsleave with Lizard Wrap, Brass Ringwork In A,B,C,D
3/8 10'' pin, flatface Non-Ivory Joint
Shaft Details: Shaft #1 3.58 oz 29'' long 12.98 mm
Shaft Details:Shaft #2 3.59 oz 29'' Long 12.86 mm
Shaft Details:Shaft #3 3.41 oz 29'' Long 12.82 mm

Straight no chips, or nicks
 
Last edited:
Schon wood stich rings

Older Schon with wood stitch rings SOLD
Maple with Irish linen wrap
one shaft original micarta ferrule

58" 19.5 oz.
Has blueing on shaft, and a nick in finish shown in photos


paypal kkefferpool@yahoo.com
please specify cue

Thanks Kennan Keffer
 
Last edited:
Verl Horn

Verl Horn custom cue

This is a beautiful, highly collectible Verl Horn custom cue. It has 6 ebony points into highly figured, Amboyna burl.
The cue has alot of ivory: 48 ivory inlays
solid Ivory joint
2 identical shafts with ivory ferrules. both 12.8mm
It is 58" in length and weighs 19.5 oz.
The Irish linen wrap is green with white speck.

1100.00 s/h included with insurance and signature

Thanks Kennan
paypal kkefferpool@yahoo.com
please specify cue
 

Attachments

  • butt1.jpg
    butt1.jpg
    25 KB · Views: 1,432
  • joint1.jpg
    joint1.jpg
    2.9 KB · Views: 1,378
  • IMG_3723.jpg
    IMG_3723.jpg
    99.8 KB · Views: 1,426
  • IMG_3724.jpg
    IMG_3724.jpg
    108.5 KB · Views: 1,430
Last edited:
I sent you a PM on the Lambros. Its not showing up in my sent folder though. I want it PM me I can pay ASAP
 
Predator SE 7

Predator SE-7 a hard to find cue
Predator Special Editions 7 by Longoni make a
statement on and off the table. This masterpiece of Italian design
celebrates the art of pool cue design with warmth and richness using a
traditional inlay technique named "Marqueterie." There are over 40+ inlays in the panther alone

Each is uniquely numbered to ensure its collectibility. The components that make this new Special Edition stand out are the finest available: 10 piece
314 shaft, Moori tip, Uni-Loc quick-release joint, and a selection of warm,
exotic woods that include Thuya, Ebony and Snakewood. Shaft: one 314 shaft.
Weight: 19.5 oz.
Condition: Mint!
Also comes with a hand made one of a kind, 1/1 maple and walnut case with the predator inlay, leather handle, fleece interior, long enough for a 31" shaft.

1500.00 case and s/h included
 

Attachments

  • IMG_3729.jpg
    IMG_3729.jpg
    106.8 KB · Views: 1,333
  • IMG_3730.jpg
    IMG_3730.jpg
    108.6 KB · Views: 1,328
  • IMG_3731.jpg
    IMG_3731.jpg
    103.4 KB · Views: 1,329
  • IMG_3733.jpg
    IMG_3733.jpg
    96.9 KB · Views: 1,320
  • IMG_3734.jpg
    IMG_3734.jpg
    103.3 KB · Views: 1,374
First edition Predator 4k6

Predator 4k6 first editon Retired

Cue is in new condition
59" 18.5 oz. one 314 shaft 5/16-14 pin piloted stainless steel joint

from 1996

1150.00 s/h included with signature
 

Attachments

  • IMG_3736.jpg
    IMG_3736.jpg
    110.9 KB · Views: 1,303
  • IMG_3737.jpg
    IMG_3737.jpg
    102 KB · Views: 1,306
  • IMG_3739.jpg
    IMG_3739.jpg
    106.3 KB · Views: 1,338
Predator IX with matching jump cue

Predator LE 9 and matching jump cue

This is your chance to get a rare Predator limited edition 9 cue with a matching jump cue made from another LE 9 .This set is awesome and both cues roll straight and the jump cue works amazing.You may never find a set like this again.The playing cue is 19oz and has a new moori tip 12.7mm and the jump cue has a phenolic tip/ferrule.(not a predator shaft on the jump cue)

LEIX 12.75mm 314 shaft 5/16-14 joint19.25 oz. with a one of a kind matching jump cue , jump cue has phenolic tip/ferrule combo
1450.00 s/h included


Thankyou
Kennan
 

Attachments

  • IMG_3743.jpg
    IMG_3743.jpg
    103.4 KB · Views: 1,303
  • butt1.jpg
    butt1.jpg
    19.8 KB · Views: 1,293
  • IMG_3745.jpg
    IMG_3745.jpg
    107.3 KB · Views: 1,279
Last edited:
Predator sneakypete

New Red pointed Predator, unilock stainless steel joint, 314-2 shaft SOLD

18.5 oz.
 
Last edited:
Justis case

How much for the Justis?

Jack Justis case made for pro Mike "The Train" Coltrain

Mike "The Train" Coltrain when he was playing on the Camel Pro Billiards Tour.
At the time Mike was considered one of the "Young Guns" at the age of 22 and feared by many of the top players.
Additional information on Mike can be found on AZ Billiards web site.
Mike played on the 1999 and 2000 Mosconi Cup team. Google for much more information on this great player.

The case is a 2x4 Justis tube type featuring silver hardware (rare), silver accents, extra tooling, scroll tooling,
colored 8 and 9 balls on the pockets and pad for the shoulder strap.
At the time Mike was being sponsored by Mike Lambros Custom Cues which is lasered across the front of the lid.
The case is used and still carrys some of the players DNA but zippers, snaps, straps and rivets are in excellent shape.

575.00 S/h

Thankyou
Kennan
 

Attachments

  • photo.jpg
    photo.jpg
    2.4 KB · Views: 287
  • back.jpg
    back.jpg
    60.1 KB · Views: 256
  • front.jpg
    front.jpg
    56 KB · Views: 255
  • top.jpg
    top.jpg
    83.9 KB · Views: 267
Last edited:
spalted maple Mcdermott cue and case set

Unique cue and case set

Spalted maple Mcdermott cue and case set

Spalted maple Mcdermott "Gecko" cue with matching spalted maple joint protectors a 0ne of a kind hand made Maple and Walnut 1/1 case with Bloodwood Gecko inlays.

Cue 18.5 oz. 58" one shaft 13mm 3/8-10pin black phenolic collar
brown lizard wrap

One of a Kind hand made case 1/1 Maple with walnut ends and Ebony corner joints, brass fittings, leather handle. Bloodwood "Gecko" inlays,
brown fleece interior with a pocket accessories. will fit up to a 30" cue

525.00 s/h with insurance and signature
 

Attachments

  • IMG_0787.jpg
    IMG_0787.jpg
    101.2 KB · Views: 248
  • IMG_0788.jpg
    IMG_0788.jpg
    102.8 KB · Views: 235
  • IMG_0791.jpg
    IMG_0791.jpg
    100.4 KB · Views: 248
  • IMG_0792.jpg
    IMG_0792.jpg
    100.4 KB · Views: 236
Last edited:
Back
Top