Brianna cue building lathe and Hightower inlay attachment for sale, along with a long list of supplies. The lathe and the inlay have had very limited use. I build all of my cues on full size lathes, so I do not have a need for these items. Everything is in excellent condition as you can see in the pictures. I robbed the feed motor off of this lathe to put on another piece of equipment, but I would be willing to get it all set back up. I didn't do it before hand because everyone has a different idea on what they would like to do and how...
1) Brianna Lathe w/Steel Bed & Leadscrew feed, taper bars for shaft and butt
2) Hightower inlay attachment.
3) 3 inlay patterns
4) A2Z Quick change tool post
5) Extra Taig carriage with worm drive for lead screw feed, extra Taig Gear box for Lead Screw Feed
6) Drive Pins 3/8-10, 3/8-11, 5/16-14, Radial pin
7) 5/16-14 joint pins with inserts (13)
8) 3/8-10 pins (6)
9) Cue Components CA 1 thin, 1 Med.
10) Butt plates, 3 black and 3 ivory colored with bumpers
11) Ivory colored A-joints
12) Live Center set, standard 60* long nose 60*, Cup center
13) Drill Chuck
14) Various rings, some aluminum, some fiber, some nickel
15) 1 Taig tool post
16) Collet set
17) Various wood, exotic and shaft wood to get you going on cue building
18) A whole bunch of veneer in various colors, see pictures
19) Bag of various types of ferrules and tips
Depending on whether or not you are new to cue building lathes, I have a whole slew of stuff that I could include to get you on the right track to building cues. wood, tooling, measuring tools etc etc...
For the items that are listed and pictured, the price is $3000.00...... SOLD!!
If you have any questions, you can PM me, or send me an email at joneseycues@hotmail.com
1) Brianna Lathe w/Steel Bed & Leadscrew feed, taper bars for shaft and butt
2) Hightower inlay attachment.
3) 3 inlay patterns
4) A2Z Quick change tool post
5) Extra Taig carriage with worm drive for lead screw feed, extra Taig Gear box for Lead Screw Feed
6) Drive Pins 3/8-10, 3/8-11, 5/16-14, Radial pin
7) 5/16-14 joint pins with inserts (13)
8) 3/8-10 pins (6)
9) Cue Components CA 1 thin, 1 Med.
10) Butt plates, 3 black and 3 ivory colored with bumpers
11) Ivory colored A-joints
12) Live Center set, standard 60* long nose 60*, Cup center
13) Drill Chuck
14) Various rings, some aluminum, some fiber, some nickel
15) 1 Taig tool post
16) Collet set
17) Various wood, exotic and shaft wood to get you going on cue building
18) A whole bunch of veneer in various colors, see pictures
19) Bag of various types of ferrules and tips
Depending on whether or not you are new to cue building lathes, I have a whole slew of stuff that I could include to get you on the right track to building cues. wood, tooling, measuring tools etc etc...
For the items that are listed and pictured, the price is $3000.00...... SOLD!!
If you have any questions, you can PM me, or send me an email at joneseycues@hotmail.com
Last edited:
