javianpicardo33
New member
Hi All,
I would like to share my experience of fitting a Lucasi Pool Cue Extension with Predator Cue Quick Release Extension.
With any Lucasi Cue butt order a desired size extension from Amazon or Predator website.
Links: https://www.amazon.com/KONLLEN-Exte...7189&sprefix=predator+extension,aps,84&sr=8-2
or
https://www.predatorcues.com/usa/predator-qr-2-pool-cue-extension.html
Step 2: Because the predator thread is smaller with Lucasi Cue Butt hole you need a thread that can fit on top of the Predator QR2 bumper or use the bumper that comes from Step1 amazon product.
I ordered a M16*1.5*20 Fine Thread insert from belmetric.com.
Note: Please select 20mm option.
Link: https://belmetric.com/time-sert-thr...rt-carbon-steel-multiple-lengths/?sku=TS16159
Step 3: Add little wood filler glue or Construction Glue from your local store in the Cue butt hole (2mm thick glue on all the size).
Let it dry for 15 minutes. Now put the insert attached with QR2 bumper in the hole and let it dry and cure for 24 hours minimum.
I used the construction glue from : https://www.amazon.com/Gorilla-8020...orilla+construction+glue,tools,73&sr=1-4&th=1
After the drying process clean the excess glue and you are ready to use the Predator Cue Quick Release Extension with the Lucasi Butt with QR2 bumper.
Enjoy your game.
Tips appreciated: https://paypal.me/javianpicardo
NOTE: After this process you will not be able to remove/add weight bolts in Lucasi cue after the above process.
I would like to share my experience of fitting a Lucasi Pool Cue Extension with Predator Cue Quick Release Extension.
With any Lucasi Cue butt order a desired size extension from Amazon or Predator website.
Links: https://www.amazon.com/KONLLEN-Exte...7189&sprefix=predator+extension,aps,84&sr=8-2
or
https://www.predatorcues.com/usa/predator-qr-2-pool-cue-extension.html
Step 2: Because the predator thread is smaller with Lucasi Cue Butt hole you need a thread that can fit on top of the Predator QR2 bumper or use the bumper that comes from Step1 amazon product.
I ordered a M16*1.5*20 Fine Thread insert from belmetric.com.
Note: Please select 20mm option.
Link: https://belmetric.com/time-sert-thr...rt-carbon-steel-multiple-lengths/?sku=TS16159
Step 3: Add little wood filler glue or Construction Glue from your local store in the Cue butt hole (2mm thick glue on all the size).
Let it dry for 15 minutes. Now put the insert attached with QR2 bumper in the hole and let it dry and cure for 24 hours minimum.
I used the construction glue from : https://www.amazon.com/Gorilla-8020...orilla+construction+glue,tools,73&sr=1-4&th=1
After the drying process clean the excess glue and you are ready to use the Predator Cue Quick Release Extension with the Lucasi Butt with QR2 bumper.
Enjoy your game.
Tips appreciated: https://paypal.me/javianpicardo
NOTE: After this process you will not be able to remove/add weight bolts in Lucasi cue after the above process.