Tapering Lathe $2500 - This is a Tapering lathe originally bought new and setup by Dennis Searing. He used it for approximately 20 years before upgrading to another lathe. He has built many many great cues With this lathe. It can easily taper butts by adjusting the boring head in the tailstock for whatever your desired taper is. When you want to cut shafts you just connect to the taper bar. There are actually two tapers. One is a pool taper and it's fairly stiff. The other I haven't messed with but it was meant to be for Billiard shafts but was never refined. It has a limit switch that turns a 110 outlet off once it is tripped. It provides a nice cut and is in good condition. It runs on single phase 220v. Local pickup in suburbs of Charlotte, NC
Unique wrap press - $60 shipped
Chuck Starkey Full Splice Bandsaw fixture - $300 - This is new, still in crate, never assembled. This was originally sold to Tom Hay. I bought it from Tom, never used. Would like to get my original $300 out of it. I am at the cue and case show today with it. If it doesn't sell there, I will entertain shipping with an acceptable offer to ship it to your door.
Techno Isel CNC Machine - $2000 - This is a non-working machine but is a good baseline to set up for inlays in cues. I can forward pictures if you are interested. It is the smaller size, I believe they refer to it as the 27x30. It is a servo machine, I will sell it with or without the servos. You could easily get this machine running one of two ways - 1 is buy all new electronics or your choice or 2 - you can mail these servos to Dan Mauch and he would build a controller for around $1200. In my opinion it would just be best to buy a stepper system and get it back up and running. I would like $2000 for this.
NSK Ispeed3 spindle controller and airline kit - This is an 80,000 rpm spindle, comes with everything needed. Lightly used. All items added up are well within the $6000 range. Will take $2500 shipped.
If you need pics of any item, just text me Jon 704.726.1612
Unique wrap press - $60 shipped
Chuck Starkey Full Splice Bandsaw fixture - $300 - This is new, still in crate, never assembled. This was originally sold to Tom Hay. I bought it from Tom, never used. Would like to get my original $300 out of it. I am at the cue and case show today with it. If it doesn't sell there, I will entertain shipping with an acceptable offer to ship it to your door.
Techno Isel CNC Machine - $2000 - This is a non-working machine but is a good baseline to set up for inlays in cues. I can forward pictures if you are interested. It is the smaller size, I believe they refer to it as the 27x30. It is a servo machine, I will sell it with or without the servos. You could easily get this machine running one of two ways - 1 is buy all new electronics or your choice or 2 - you can mail these servos to Dan Mauch and he would build a controller for around $1200. In my opinion it would just be best to buy a stepper system and get it back up and running. I would like $2000 for this.
NSK Ispeed3 spindle controller and airline kit - This is an 80,000 rpm spindle, comes with everything needed. Lightly used. All items added up are well within the $6000 range. Will take $2500 shipped.
If you need pics of any item, just text me Jon 704.726.1612
Last edited: